Door trim (Speakers)

AcidBoI · Post by **AcidBoI** » Thu Feb 23, 2006 7:06 pm

I am thinking of fitting speakers in my polo 6n front doors, but when it was bought it had only the front facia mounted speakers as standard and so now I can't install them as I don't have any in the doors.

What I need to ask is if it is possible to replace the door trim panel where the speakers should fit with the original 6n (4 speaker standard) door trim panel? Is it a straight swap?

polo boi · Post by **polo boi** » Thu Feb 23, 2006 9:53 pm

im not sure, u might have 2 make ur self a small frame 4 the speaker 2 fit it in the swab nxt 2 the standard 1

AcidBoI · Post by **AcidBoI** » Fri Feb 24, 2006 9:17 am

hmm, anyone did it?

I don't want to mess with the door trim to say the truth, what I thought was that I could just buy a new lower door trim where the speakers should fit and buy the frame where they should fit. But if it takes more things to do, I will just buy some good speakers for the facia in the dash, altough the result could not be the same as they are smaller...

Pedro_Hilario · Post by **Pedro_Hilario** » Fri Feb 24, 2006 2:55 pm

I've done it.

Bought the "pockets" with space for the speakers, the grills, and then just wired it all up.

I have a DIY on it ( in portuguese). But if you are from Malta you should be able to understand portuguese. And the pictures are selfexplanatory.

Any questions pm me.

http://www.clube-polopt.com/phpBB2/viewtopic.php?t=1968

(right click and save on Baixamento to download it)

AcidBoI · Post by **AcidBoI** » Fri Feb 24, 2006 6:55 pm

thanks a lot mate, well what I could have understood were maltese, english, italian and french, unfortunately portuguese is not so common in Malta.

But I'm sure u'll be of great help.

You have a pm!

1stcarsapolo · Post by **1stcarsapolo** » Sun Feb 26, 2006 11:24 pm

oh how id love if that were in english..... wheres my old french teacher when I need her lol