South African 1.9TDI PD 130 Dyno sheet

Super Stu · Post by **Super Stu** » Mon Feb 27, 2006 10:07 am

Pre and post DIMSPORT chip, quite an improvement

viceroy · Post by **viceroy** » Mon Feb 27, 2006 2:41 pm

Hi Stu...Welcome to the forums

polo9n3 · Post by **polo9n3** » Tue Mar 07, 2006 12:36 pm

Whats your 0-60 times like now?

viceroy · Post by **viceroy** » Tue Mar 07, 2006 1:16 pm

I suppose Stu and i could get together and do some timing experiments sometime with my timing equipment

Super Stu · Post by **Super Stu** » Tue Mar 07, 2006 1:28 pm

viceroy wrote:I suppose Stu and i could get together and do some timing experiments sometime with my timing equipment

Now that sounds like an idea

RichardBW · Post by **RichardBW** » Tue Mar 07, 2006 8:57 pm

I know you say Dimsport in the first post but who actually made the tuned file?

Tahrey1043 · Post by **Tahrey1043** » Mon Mar 13, 2006 12:17 am

odd combination of units it uses - imperial horsepower with metric newton-metres .... where's the accompanying kilowatts vs lb-ft graph?

I assume the left hand box is the second set of results, and the upper line is torque.... nice set of curves

*edit* wait, it went up from 320 to 400Nm just by chipping?

jeez, thats like putting your capacity up to 2.4L! you gotta be happy with that (wish i'd have had dim's services for tuning the ol' runabout, even...)

viceroy · Post by **viceroy** » Mon Mar 13, 2006 9:45 am

Tahrey1043 wrote:odd combination of units it uses - imperial horsepower with metric newton-metres .... where's the accompanying kilowatts vs lb-ft graph? I assume the left hand box is the second set of results, and the upper line is torque.... nice set of curves

*edit* wait, it went up from 320 to 400Nm just by chipping? jeez, thats like putting your capacity up to 2.4L! you gotta be happy with that (wish i'd have had dim's services for tuning the ol' runabout, even...)

Not really funny.

Nm is a finer measurement than foot pounds
and HP is a finer measurement than Kw.

By finer I mean that smaller changes (increases) show up better and easier.

for example to go up by 1kW you're actually going up by about 1.3Hp, and the same would go for torque.

We're a metric country though so Nm and Kw are the standard measurements and most people understand those