Door Speakers

mysteryboy · Post by **mysteryboy** » Wed Mar 22, 2006 11:23 am

Does anyone know how to get to these.... Do you have to remove the whole door card off or just screwdriver the speaker bit out

Also anyone know what size they are?

Thanks...!!!

SAM_MK4_19D · Post by **SAM_MK4_19D** » Wed Mar 22, 2006 12:19 pm

The grilles just pop out mate if you stick a screw driver in one edge and lever them sort of thing. Think they are about 16cm from when I did mine. I also managed to fit 10cm ones in the grilles on top of the dash.

mysteryboy · Post by **mysteryboy** » Wed Mar 22, 2006 3:00 pm

So it is a screwdriver job... thought so..! Cheers mate will probs have a crack at it next week... they're not too hard to wire up are they?

willy g · Post by **willy g** » Wed Mar 22, 2006 3:00 pm

Dead easy just leaver speaker grill off.

Just done mine mate 61/2 inch or 17cm!

mysteryboy · Post by **mysteryboy** » Wed Mar 22, 2006 3:02 pm

willy g wrote:
Just done mine mate 61/2 inch or 17cm!

Oh..cheers for the measurements... How many watts should I be looking to buy..? 300 ish?

ModifiedMadness · Post by **ModifiedMadness** » Wed Mar 22, 2006 4:33 pm

mysteryboy wrote:
willy g wrote:
Just done mine mate 61/2 inch or 17cm!
Oh..cheers for the measurements... How many watts should I be looking to buy..? 300 ish?

If you're getting some with that power, you'll no doubt need an amp.

Otherwise they'll be getting next to no power.

mysteryboy · Post by **mysteryboy** » Wed Mar 22, 2006 4:47 pm

an amp upfront? i've got one already in the back (4 channel) could i use that one?

ModifiedMadness · Post by **ModifiedMadness** » Wed Mar 22, 2006 4:48 pm

yeah, one channel per speaker, so long as impedence is matched.

mysteryboy · Post by **mysteryboy** » Wed Mar 22, 2006 4:52 pm

oh sweet... as long as i dont need to go amp shoping.. was akward anough the 1st time...
Well guess I'll sort that out sometime before june/july lol...

Thanks...!!