VAG COM

[RICHARD HARPER]

Hi, This may sound silly but i've just received my vag com cable today, heres the link to it.

http://cgi.ebay.co.uk/VAG-COM-COMPATIBL ... dZViewItem

My airbag light is on and does anyone know how to use vag com to switch it off ?

I'd also like to switch on the beep for the alarm

You help would be great guys as i've never used vag com before

Cheers

[Dangerous Dave]

DO NOT use vagcom to scan the air bag controller you will permantly lock the contoller up and it will need replaced if the part number is 6Q0-909-605-A. It will automatically skip the controller however you can override this. If you have this controller it will need to be a dealer job to reset it see Clicky Clicky

You can turn on the beep with the alarm however I found it very very annoying after a couple of days, I can't remember the exact codes to enable it I just did a search on google for them.

[RICHARD HARPER]

Ok cheers Dave, i'll give airbag a miss
I'll have a look on google for beep codes

Does anyone on here know the codes /

[RICHARD HARPER]

Just done a search on here first .
Would this sequence for the alarm beep on 9n work with the gti even though its a 6n2
Heres the link

http://www.tigerstyle.co.uk/poloforum/v ... alarm+code

Does anyone know ?

[clees]

Can you expand on this vagcom cable??

I'm pretty new to it!

[clees]

Can you expand on this vagcom cable??

I'm pretty new to it!

[RICHARD HARPER]

Been trying to communicate with car through the VAG COM software on my lap top tonight and it keeps saying all 4 of my com ports are inaccessable when i go into options and use test button on each one to configure cable (Cable was plugged into diagnostic plug in car with ignition on as well)

I'm lost it doesnt seem to be able to communicate with the VAG COM cable thats plugged into my serial port


HELP GUYS I'M NOT VERY TECHY MINDED WITH COMPUTERS !!!!!!!!!!!!!!!!!!!!!!!!