Where to mount an alarm siren in a Mk4 engine bay?

mmh · Post by **mmh** » Wed Jun 14, 2006 8:59 pm

Hi,

I'm just about to fit an alarm and am finding it hard to find a suitable place to mount the siren unit on a Mk4.

It's a larger siren module with battery back up.
Where are your's fitted? pics would be great.

Cheers, Mo

RR Livi · Post by **RR Livi** » Wed Jun 14, 2006 9:34 pm

mine is to the right of the airbox

but surely there is an area near the battery??

dragon_green · Post by **dragon_green** » Wed Jun 14, 2006 10:18 pm

whack it in near the battery. should cause considerable discomfort to any pikeys trying to disconnect your battery to turn it off

at least mine did, when I was trying to change the battery...

mmh · Post by **mmh** » Wed Jun 14, 2006 10:23 pm

dragon_green wrote:whack it in near the battery. should cause considerable discomfort to any pikeys trying to disconnect your battery to turn it off at least mine did, when I was trying to change the battery...

Cheers for the replies.

Where abouts near the battery do you mean?

Thanks,
Mo

dragon_green · Post by **dragon_green** » Wed Jun 14, 2006 10:33 pm

think mine is actually to the left of the battery, near the bulkhead, come to think of it

worked well though, i had a ringing in my ears for a while after....

mmh · Post by **mmh** » Wed Jun 14, 2006 10:40 pm

dragon_green wrote:think mine is actually to the left of the battery, near the bulkhead, come to think of it

worked well though, i had a ringing in my ears for a while after....

I'll check it out, as long as I can get to that area with a drill to put some holes in for the bolts should be OK.

I was going to bolt it to the battery plate...but that would be fat too easy for the pikeys.

If anyone has any other positions for the siren let me know also.

Mo

dragon_green · Post by **dragon_green** » Wed Jun 14, 2006 11:02 pm

you could always used rivets instead of bolts. worth keeping the wires tucked away too, for obvious reasons i would think