mk4 dash removal

Dub1 · Post by **Dub1** » Tue Aug 29, 2006 10:46 pm

anyone done this? found a polo at my local scrapyard, want the dash but not sure how to remove it

willriseley · Post by **willriseley** » Wed Aug 30, 2006 5:45 pm

remove all attached bits
remove all visible fixings
then pull it till its either pops out or breaks
problem solved!

Dub1 · Post by **Dub1** » Wed Aug 30, 2006 5:46 pm

anyone? im in urgent need of some knowhow

thanks

dragon_green · Post by **dragon_green** » Wed Aug 30, 2006 5:57 pm

haynes manual.

Dub1 · Post by **Dub1** » Wed Aug 30, 2006 6:08 pm

nothing in there, every little bit about & around the dash, but not actually the dash itself

warrmr · Post by **warrmr** » Wed Aug 30, 2006 8:57 pm

Dub1 wrote:nothing in there, every little bit about & around the dash, but not actually the dash itself

i think theres 2 bolts in the engine bay under the scuttle pannel by the ECU and in the opposit corner.

and 2 more bolts on opposit sides in the footwells.

and one in teh center console the rest of it is just clipped on try unbolting all those first then give it a tug if it doesnt come free see where it sticks and you will find more bolts if any.

dragon_green · Post by **dragon_green** » Thu Aug 31, 2006 5:23 pm

Dub1 wrote:nothing in there, every little bit about & around the dash, but not actually the dash itself

that sucks a bit!