hi
would the following fit on my vw polo 6n2?
anyone able to do a photoshop for a bright blue polo (pic below)
also anyone know where i can get the 16'' keskin kt4 in black with polished rim? what sizes would fit a 6n2 without bodywork?
many thanks
http://images.google.co.uk/imgres?imgur ... D%26sa%3DN
momo alloys : http://cgi.ebay.co.uk/MOMO-CORSE-15-ALL ... dZViewItem
do these fit?
-
polopowah
- Bling Bling Diamond Member
- Posts: 3139
- Joined: Tue Feb 10, 2004 5:02 pm
- Location: Hertfordshire Drives: Ford Puma 1.7 Enjoys: Mowing grass
yes they will
general rule of thumb with alloys for the mkv is as follows......
et of around 35 (lower if you want the wheels sticking out abit)
4x100 pcd
40 or 45 profile always helps if you plan on lowering.
The mkv is lucky in having slightly bubbled arches as standard and has the capacity for taking reasonable sized wheels (eg. 15,16's) and still have the ability to lower upto and past -80mm on coil-overs (obviously lower with exceptions such as tyre width, light arch mods)
as for my car im at -75mm with 16's 195,45,16 and i have light tyre scrubbage which causes no problems.
hope that help abit
-Ben-
general rule of thumb with alloys for the mkv is as follows......
et of around 35 (lower if you want the wheels sticking out abit)
4x100 pcd
40 or 45 profile always helps if you plan on lowering.
The mkv is lucky in having slightly bubbled arches as standard and has the capacity for taking reasonable sized wheels (eg. 15,16's) and still have the ability to lower upto and past -80mm on coil-overs (obviously lower with exceptions such as tyre width, light arch mods)
as for my car im at -75mm with 16's 195,45,16 and i have light tyre scrubbage which causes no problems.
hope that help abit
-Ben-
-
eviemunchkin
- New
- Posts: 30
- Joined: Mon Jul 10, 2006 6:32 pm
yeh thanks for the help mate!! i like those wheels, they look like fox evo 3? not sure, but i quite like those in the platinum colour as well.
so how difficult is it to fit coilovers and lower the car? i've never done any car work, so maybe easier for a garage to do it? how much for a set of coilovers and garage prices? thanks again
so how difficult is it to fit coilovers and lower the car? i've never done any car work, so maybe easier for a garage to do it? how much for a set of coilovers and garage prices? thanks again
-
eviemunchkin
- New
- Posts: 30
- Joined: Mon Jul 10, 2006 6:32 pm
-
eviemunchkin
- New
- Posts: 30
- Joined: Mon Jul 10, 2006 6:32 pm