Brake Pads !

Bran · Post by **Bran** » Mon Oct 23, 2006 6:09 pm

Hey I need helping changing my brake pads - i managed to get the wheel off, then i got stuck lol

how do i move the calliper so i can fit new pads - ive seen the below guide, but it looks different on my 6n2

http://www.tigerstyle.co.uk/poloforum/v ... hp?t=16835

jonnopolo · Post by **jonnopolo** » Mon Oct 23, 2006 8:28 pm

You need to undo the 2 caliper bolts (enclosed in rubber boots) & they can be quite difficult to budge. Once you've got those out, lift off the caliper and secure it so you don't bend or stretch the brake hose. You'll then need to push in the piston to accomodate the new pads. I use a g-clamp for this.
HTH.

Bran · Post by **Bran** » Tue Oct 24, 2006 10:35 am

thanks for the reply, i'll give it a go !