hi,
today I installed a sony DX-GT300S headunit to my polo but now the component speaker output is all zero, there are no low range frequencies coming out at all.
any ideas?
new headunit but lost component output
-
dragon_green
- Gold Member
- Posts: 599
- Joined: Mon Jul 04, 2005 9:47 pm
no the door speakers.
i think i have worked it out though. for some reason the low, mid and high eq values were all set to +10, when i lowered the high and mid to 0 you could feel the bass coming out the door.
i think it must just be the thing that splits the signal was just sending the extra high frequency to the door speakers so not to overload the dash ones and then this stopped the low frequencies coming out.
cheers for replies
i think i have worked it out though. for some reason the low, mid and high eq values were all set to +10, when i lowered the high and mid to 0 you could feel the bass coming out the door.
i think it must just be the thing that splits the signal was just sending the extra high frequency to the door speakers so not to overload the dash ones and then this stopped the low frequencies coming out.
cheers for replies