How do you put window switches back together?

mmh · Post by **mmh** » Wed Nov 29, 2006 10:24 pm

Hi,

I took my electric window switches apart to change the illumination colour but now when I push the bits back together it doesn't seem to be clicking for both up and down.

The contacts are in the right order and place. Is there a nack to it?

I'm just stuck on the top bit with the illuminated icon and the 2 spring loaded prongs.

Any help appreciated. Thanks

Phil6N · Post by **Phil6N** » Wed Nov 29, 2006 10:46 pm

make sure you have the 2 little metal sprong things sitting correctly. As thats the really the only thing that would affect it.

mmh · Post by **mmh** » Wed Nov 29, 2006 11:32 pm

Phil6N wrote:make sure you have the 2 little metal sprong things sitting correctly. As thats the really the only thing that would affect it.

Hi does the switch top go straight down when lined up with the two circle locking pivot tabs or do you need to press the switch in one direction when fitting back on?

Thanks