Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
mine is currently earthed to a bit of metal that sticks out behind the bumper ther was a whole init so i jus stuck a screw through it and tightened the ground down
but my amp keeps cutting out when ther's a little too much bass
I'm not sure whether you'd want to do it yourself. I think you have to drill a hole, which is ever so close to the fuel tank. I had my sub fitted professionally.
This is cable Ollie (the one in the box) Should be in for the South East meet hopefully, if you're going to be there I'll give you a demo of it all. (rest of the pics can be seen HERE)
As for your problem Samil, is that metal bit part of the chassis? If not then I'd suggest finding a bolt that is.
samil87 wrote:my 6x9s run at 4 ohms and the amp says it is stable at 2 ohms could this cause it to cut out randomly?
or would it just be the ground
Iv grounded mine to the passenger side wall, when you move the carpet, on top of the suspension there will be a hole on the metal wall on the left of this, iv sanded it down a little to get rid of the paint and just stuck a nut and bolt to it.