ref alloys

tinny22 · Post by **tinny22** » Sun Dec 10, 2006 2:03 pm

i am buying some alloys for my vw polo w reg. can anybody help me what is the pcd. the alloys are 4 stud pcd 100 15in will they fit my car it would be a big help
thanks tinny22

Si_GTi · Post by **Si_GTi** » Sun Dec 10, 2006 2:22 pm

The alloys you describe will fit just fine as long as the offset is suitable.

PCD, or Pitch Circle Diameter, is the diameter of a circle drawn through the center of your wheel's bolt holes. PCD is measured in millimetres and also indicates the number of studs or bolts the wheel will have. So for you, your Polo has 4 studs with a PCD of 100mm, hence the fitment 4x100.

DanDiesel · Post by **DanDiesel** » Sun Dec 10, 2006 2:23 pm

4x100 PCD is fine and 15inch is a decent size and i think the offset u will need is around ET38!

tinny22 · Post by **tinny22** » Tue Dec 12, 2006 9:52 am

i have been told there the ET is 45 will they fit thanks for the help
tinny22

Alex_6n2 · Post by **Alex_6n2** » Tue Dec 12, 2006 6:10 pm

They'll look a bit hidden under your arches but spacers will sort that right out.