right offset?

polopaul · Post by **polopaul** » Thu Dec 28, 2006 3:25 pm

found some wheels, 15x7, et 25, are this gunna stick out too much to slam it? or just enough too look cool but still be able to lower properly
cheers

vdubit · Post by **vdubit** » Thu Dec 28, 2006 5:17 pm

The rear arches will need rolling a little, but only 5mm or so so you can do it yourself with pliers and a hammer. The front theoretically should be ok, but may catch a little on the splash guards if youi go really low.

This is assuming you use 195 tyres. If you ran 175/50 15 stretched it should be fine with no probs. Also basing it on being lowered at least 70mm.

polopaul · Post by **polopaul** » Thu Dec 28, 2006 9:41 pm

theyr on 165/50 tyres, so yeh a nice stretch. not to sure i like the sound of rolling the arches myself with pliers and a hammer tho!how do you go about doing that?