Yet another problem........Indicators this time!!!!

Chat about your MKV (6N2) Polo GTi
Post Reply
clees
Bronze Member
Posts: 245
Joined: Thu Mar 10, 2005 9:49 pm
Location: Manchester

Yet another problem........Indicators this time!!!!

Post by clees »

Hello good people,

Ok, i have just developed another problem on my car, the indicators!! :evil:

Everytime i flick the indicators on it just stays on and doesn't flash on and off, it is the same for the hazard lights too!!

Any suggestions??

cheers guys!!
loud
Gold Member
Posts: 989
Joined: Tue Jul 20, 2004 12:17 pm
Location: 25 miles south of Aberdeen Drives: 9N3 Polo GTi

Post by loud »

could be a relay thats gone
clees
Bronze Member
Posts: 245
Joined: Thu Mar 10, 2005 9:49 pm
Location: Manchester

Post by clees »

Is that a tricky job??
smokeGTI
Bronze Member
Posts: 182
Joined: Sun Jun 12, 2005 2:39 pm
Location: HK SAR

Post by smokeGTI »

Check if there are any blown blub, did you change any indicator blub recently,
if yes make sure they are the same watts, last one is relay.
clees
Bronze Member
Posts: 245
Joined: Thu Mar 10, 2005 9:49 pm
Location: Manchester

Post by clees »

Ive not changed any bulbs but i have been told that the hazard lights switch is a relay which is the possible cause of the problem.

So ive purchased a hazard switch and ive got my Haynes manual out!!

Piece of Pi**!! ha ha :lol:
clees
Bronze Member
Posts: 245
Joined: Thu Mar 10, 2005 9:49 pm
Location: Manchester

Post by clees »

Ive not changed any bulbs but i have been told that the hazard lights switch is a relay which is the possible cause of the problem.

So ive purchased a hazard switch and ive got my Haynes manual out!!

Piece of Pi**!! ha ha :lol:
clees
Bronze Member
Posts: 245
Joined: Thu Mar 10, 2005 9:49 pm
Location: Manchester

Post by clees »

Ive not changed any bulbs but i have been told that the hazard lights switch is a relay which is the possible cause of the problem.

So ive purchased a hazard switch and ive got my Haynes manual out!!

Piece of Pi**!! ha ha :lol:
clees
Bronze Member
Posts: 245
Joined: Thu Mar 10, 2005 9:49 pm
Location: Manchester

Post by clees »

Ive not changed any bulbs but i have been told that the hazard lights switch is a relay which is the possible cause of the problem.

So ive purchased a hazard switch and ive got my Haynes manual out!!

Piece of Pi**!! ha ha :lol:
Post Reply