Well, my heater control knob (the middle one, hot/cold) lights up nice and bright, but the fan speed looks a bit dim, especially the number 1, and the directional controls the same, dim on the right hand side...
Are they all like this? There is only one bulb, but surely it should light up consistantly?
Ta in advance.
Tom.
Heater controls illumination - whats yours like?
-
Nuclear_Tom
- New
- Posts: 25
- Joined: Sun Feb 25, 2007 6:37 pm
Re: Heater controls illumination - whats yours like?
Tom,Nuclear_Tom wrote:Well, my heater control knob (the middle one, hot/cold) lights up nice and bright, but the fan speed looks a bit dim, especially the number 1, and the directional controls the same, dim on the right hand side...
Are they all like this? There is only one bulb, but surely it should light up consistantly?
Ta in advance.
Tom.
mines exactly the same as your's and looks really dim, I was wondering the same think too.
-
Nuclear_Tom
- New
- Posts: 25
- Joined: Sun Feb 25, 2007 6:37 pm
This is correct... just thought that something might be out of alignment or something as it looks a bit naff really.Biddle wrote:well i took the plastis suround off mine to have a look and i found the middle one has bulbs behind it but te others are lit up by two horseshoe shaped pieces of plastic which carry the light around behing the other displays.
May look into getting a couple of extra small bulbs or something...
Yeh its just one bulb, im not sure what happens if you change the colour of this because the plastic with all the images on is tinted green. I changed the piece of plastic in mine to blue, jus scanned in the original, photoshopped it blue then printed it over itself 3 times onto acetate... it was worth it but still needs work 
I also scanned in the original piece of green plastic over the speedo/rev counter and made a blue one 
I also scanned in the original piece of green plastic over the speedo/rev counter and made a blue one 