gear knob?

Gar · Post by **Gar** » Sat Mar 10, 2007 10:52 pm

was browsing the net and found this
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0087647957
and was wondering would it fit a regular polo gearstick. im not at home so i cant check my car!

Bepe · Post by **Bepe** » Sun Mar 11, 2007 6:59 am

i would say yes, as they are all based on the same fitting! but if you want one get one from vag parts mate!

MaxZ · Post by **MaxZ** » Sun Mar 11, 2007 11:35 am

if it's an original gear knob it will fit, however you will have to get yourself a new sort of metal clip, as the one that is on your gear knob will come off when you take it off.

Gar · Post by **Gar** » Sun Mar 11, 2007 12:59 pm

MaxZ wrote:if it's an original gear knob it will fit, however you will have to get yourself a new sort of metal clip, as the one that is on your gear knob will come off when you take it off.

well finally got home and had a look at the stick. it seems to be one moulded 1 and i dont think it unscrews off! does anyone elses gear stick sounds like this?

oh and thanks 4 the replies

DanDiesel · Post by **DanDiesel** » Mon Mar 12, 2007 10:13 am

u have to unclip the gaitor at the bottom and lift it up! underneath u will find the metal part of the gear stick and at the top of the metal part there is a metal clip that needs to be cut and then the whole gearknob/gaitor should just pull off!
if ur changng the knob, u will probably need to change the gaitor aswell due to the originals being sewn together!
hope this helps