New wheels, possibly...

Si_GTi · Post by **Si_GTi** » Mon Mar 26, 2007 7:31 pm

Well the standard BBS are ET45. My G60 steels, and these wheels in this thread, are ET35. You can go as far as ET20 (ATS Cups) on a GTi with standard arches, d-dub has done this with great success. With a little arch work you can go as wide as you want really...

garnier · Post by **garnier** » Mon Mar 26, 2007 7:32 pm

I thought the RXIIs were ET35

Redline · Post by **Redline** » Mon Mar 26, 2007 7:51 pm

garnier wrote:I thought the RXIIs were ET35

They have ET45 stamped on the back side of them.

ModifiedMadness · Post by **ModifiedMadness** » Mon Mar 26, 2007 8:08 pm

Yup, ET45.

I now have a set of ET35 wheels on at the minute as well which were fitted today

Must say after looking at them, the GTi wheels would look much better as ET35's

Si_GTi · Post by **Si_GTi** » Mon Mar 26, 2007 9:11 pm

ModifiedMadness wrote:I now have a set of ET35 wheels on at the minute as well which were fitted today

You kept that quiet!

ModifiedMadness · Post by **ModifiedMadness** » Mon Mar 26, 2007 9:32 pm

It's only a set of G60's, the BBS are off to get sorted tomorrow (finally)

DanDiesel · Post by **DanDiesel** » Tue Mar 27, 2007 12:45 pm

My RXIIs are ET43!

mk4 glx 1.6 · Post by **mk4 glx 1.6** » Tue Mar 27, 2007 1:16 pm

7J ET35 is spot on Si, same as my Rondells. They make a good difference to the appearance, these could look quite good on the car, although I think they will look the brakes look small(er).

D-Dub · Post by **D-Dub** » Tue Mar 27, 2007 7:55 pm

10mm spacers made all the difference to my BBS's. I don't understand why VW made such a sexylicious wheel so skinny, bunch of muppets

Si_GTi · Post by **Si_GTi** » Tue Apr 03, 2007 7:42 pm

I'm so indecisive sometimes...

Changed my mind re these rims, they are now sold and I have gone after some wheels from Germany