1.4 POLO slow as f**k

Chat about your MKIV (6N) Polo
JoeG07
Gold Member
Posts: 842
Joined: Sun Apr 08, 2007 11:42 pm

1.4 POLO slow as f**k

Post by JoeG07 »

Prettty sure this is just how Polo's are designed, but my polo is a 1.4 and is pretty damn slow, my mates 1.2 corsa can beat it (embarrestment!) Can't understand why a relatively big engine is so slow, but anyway, what can I do to make it faster? I know induction kits and all that crap make a lot of noise and dnt do bugger all. I'm 17, what can i add that will make noticable difference that won't break the bank and WON'T rocket my insurance? Or am i living in a silly fantasy world, and all this is just not possible? Am i looking to spend eccess of £300 and the same again on insurance?

ALSO this is what i would like to do
Image
(photoshopped) BUT I JUST CAN'T AFFORD THE SPRAYING!! I can buy the kit for quite cheap and my mate can fit for free, but spraying is so much!!!
Bullough
New
Posts: 13
Joined: Sat Mar 17, 2007 1:56 am
Location: Wigan, Lncashire

Post by Bullough »

The reason ur car is so slow is because most polo 1.4's are 8 valve instead of 16 valve ur mate's corsa is prob a 16valve. Anyway to make it faster u could maybe have it chipped thats gona cost ya about £300 tops and you could always not tell ur insurance about that lol thats gona be ur best bet if u dont want induction kits and huge exhaust after that your talking turbos and god knows what else.
dragon_green
Gold Member
Posts: 599
Joined: Mon Jul 04, 2005 9:47 pm

Re: 1.4 POLO slow as ****

Post by dragon_green »

JoeG07 wrote:am i living in a silly fantasy world, and all this is just not possible?
think you may well be, unfortunately.

the real benefits of a remap are found when you've done a lot to your engine... remapping a standard engine ain't gonna get you much, especially on a fairly simple engine like the 1.4 8v.
Robdeforma
Getting There!
Posts: 53
Joined: Wed Feb 15, 2006 3:55 pm
Location: Wootton, Isle of Wight.

Post by Robdeforma »

The 1.4's main floor is acceleration in the first few gears from a stand still. That does unfortunatly come from the majority being only 8v, my mum has just got an 05' 1.2 Polo Twist which is 12v and driving that I can feel so much difference.

Its hard to say what would actually stop this problem keeping the same engine in, induction kits don't give you much if anything on BHP, remapping it can bring it up a bit but as dragon_green said, unless your willing to upgrade more parts within your engine it wont do much.

A mate of mine used to race with a 1.4 Polo 6N and before he wrote it of on the track, he had it at 135bhp (tested on a rolling road) but he had a full engine upgrade not just the remapping done....
skyline.99
Getting There!
Posts: 55
Joined: Sat Jun 18, 2005 3:45 pm
Location: LONDON

Beat a corsa

Post by skyline.99 »

I have the same polo 1.4 8v and my mate also has a 1.2 corsa (not twin port). Im pretty sure my polo is faster than his car.
So far I have a
Exauhst manifold
Air filter
Cold air intake
Backbox

He has an air filter n exhaust too but no cold air intake or exhaust manifold.

Anyway hope that helps
JoeG07
Gold Member
Posts: 842
Joined: Sun Apr 08, 2007 11:42 pm

Post by JoeG07 »

awesome does it make much difference to your polo?
LeMeph
Platinum Member
Posts: 1044
Joined: Sat Apr 22, 2006 7:50 pm

Post by LeMeph »

Ive raced 1.6 16v corsas and won before now...

what is it with my car??? only a 1.4 8V and i seem to beat most little cars. Maybe i just know how to thrash my car properly??

Hmmm... maybe...

How long have you been driving mate? Dont wanna sound insulting or anythign but maybe you just dont know how to throw your little beats about properly? Either that ro your engine is just ragged to s**t lol.
User avatar
pip_polo
Bling Bling Diamond Member
Posts: 2454
Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:

Post by pip_polo »

i agreee with the guy about my 1.4 8v is faster than my mates 1.2 16v corsa by a mile. experiment with it, get it right and don't be letting no corsa's beet you :lol:
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

on paper the corsas are faster.

ive had plenty tests on the 1.4 8v and its not bad up to the end of 2nd gear, as soon as you put it into 3rd (~50mph) it just takes ages to get to 60!

VW say the 0-60 is 14.9s i believe, but ive had it at 13.0s. :wink: (standard car)
PeteJ
Bronze Member
Posts: 144
Joined: Thu Apr 06, 2006 6:02 pm
Location: Shavington,Cheshire. 1.6 8v

Post by PeteJ »

anything you do to your car at your age will make it even more epxensive.

the engine wont really be good for much more bhp than it already has not without spending silly money.

start pulling stuff off the car :) make it lighter, there's a ton of things you dont NEED on a car :

rear seats
passenger seat
soun deadening (hidden behind all the interior panels)
the interior panels :)
a dash board
carpets!
ANY plastic or carpet you can remove.

see if its faster then!

failing all its a talking point hehe.
dragon_green
Gold Member
Posts: 599
Joined: Mon Jul 04, 2005 9:47 pm

Post by dragon_green »

agree with you up to a point pete - but maybe best to leave the dashboard in....? ?

firstly it houses a shedload of wiring and secondly it will deform more than the metal frame should your head hit it in an accident!

you forgot the spare wheel though :D

making sure you've serviced it properly (good oil and good gearbox oil) will help. and make sure everything is warmed up properly before you rag it too.
PeteJ
Bronze Member
Posts: 144
Joined: Thu Apr 06, 2006 6:02 pm
Location: Shavington,Cheshire. 1.6 8v

Post by PeteJ »

dash board? pfeh!!! fling it :P fix the speedo in position with tape.
spare whel can go too :)
get small alloys as there lighter than larger alloys... er smaller = faster acceleration etc.

throw the exhuast away too :) thats heavy
dont need doorhandles either.
Redline
Sponsor
Posts: 1641
Joined: Tue Jan 28, 2003 9:43 pm
Drives: BMW 128ti
Location: County Durham
Contact:

Post by Redline »

:lol: Lightweight alloys are always a winner! You forgot replacing the back windows with perspex ones though!

But yeah, strip the back end out and fit a nice shiny rear strut brace.
LeMeph
Platinum Member
Posts: 1044
Joined: Sat Apr 22, 2006 7:50 pm

Post by LeMeph »

you people are still using perspex? Dark ages man. This is the 20th century man! Technology can, and has done, so much more. take me for example. Im using cellophane. i wrap my windows like i wrap my sandwiches beatch 8)

well my mum does... :roll:

LOL.
shortishort
New
Posts: 12
Joined: Sun Apr 08, 2007 5:30 pm

Post by shortishort »

what chance has my 1.4 8v gt against my mates huge 1.4 306? :D
Post Reply