Headunit Memory

bouzel · Post by **bouzel** » Mon Apr 30, 2007 4:07 pm

I just bought a headunit and installed it i was a bit lazy

and bought the adapter to connect the headunit and the original wiring in case i sell the car however whenever i just turn the key on and off the headunit seems to reset doesn't save any of my settings or anything not a major problem as i listen to CD but it's still annoying any help would be appreciated....

Lex · Post by **Lex** » Tue May 01, 2007 6:54 am

You need to switch two of the wires around on your wiring loom. I cannot remember exactly, as I had the same problem but I think you need to switch the 12v yellow lead (memory) and the 12v ignition feed around and then the memory will stay. Hope thats some help.

Post by **alexperkins** » Tue May 01, 2007 9:59 am

Yup you are kinda right. Basically, cut the yellow and the red wires - then crimp red to yellow and yellow to red. Thatll fix all your problems

bouzel · Post by **bouzel** » Tue May 01, 2007 2:47 pm

It worked cheers