standard wheel bolt length

colour_concept · Post by **colour_concept** » Wed May 30, 2007 8:57 pm

can anyone tell me what the shank length is on a original vw wheel bolt. im basically looking for a set of locking bolts for a set of aftermarket alloy wheels and will also be using 5mm spacers, therefore need to know what the original bolt length would have been...

i cant check my ones because i dont have original bolts on them. the shank length is basically the length (mm) of the bolt from thread end to the point where the bolt head starts. see pic

Ian_R · Post by **Ian_R** » Thu May 31, 2007 12:37 am

I'd Check for you mate, But it's Half 12 at night, and i'm buggered if i'm going out to check them lol, if no answer tomorrow i'll have a swatch for ya !

colour_concept · Post by **colour_concept** » Thu May 31, 2007 8:09 am

would be very much appreciated

Ian_R · Post by **Ian_R** » Thu May 31, 2007 3:03 pm

colour_concept wrote:would be very much appreciated

Hi there Mate, I measured the Shank Lengh on My Standard Bolt to Be 25mm, Hope this helps Bud.

colour_concept · Post by **colour_concept** » Fri Jun 01, 2007 9:26 am

nice one. your a saviour mate....

now the task of finding a correct bolt