Alloys will they fit?

bouzel · Post by **bouzel** » Sun Jun 03, 2007 8:00 pm

Will these alloys fit on my car: TSW
Rim Width: 6J
Rim Diameter: 15 inches
Stud: 4 Stud
I know the picture shows 5 stud but there definatly four this si the closest picture i could find to them if anyone could do a photoshop aswell that would be greatly appreciated.... Many thanks...

Bepe · Post by **Bepe** » Sun Jun 03, 2007 9:42 pm

make sure the pcd fitment is 4x100 mate, and the bore is 57.6 iirc, if someone can correct me?

Bryony84 · Post by **Bryony84** » Sun Jun 03, 2007 10:03 pm

57.1 is vw centerbore isn't it?

dubpilot · Post by **dubpilot** » Sun Jun 03, 2007 11:21 pm

^^^ correct! 57.1mm centrebore, 4x100 pcd, make sure your offset doesnt go bigger than 35 if they are aftermarket wheels and wider than 6.5J otherwise you risk hitting your suspension.

Arnoldo · Post by **Arnoldo** » Mon Jun 04, 2007 12:36 am

mine are 7j :S

Bepe · Post by **Bepe** » Mon Jun 04, 2007 7:56 am

he is onabout the offset mate, not the width, 7j is fine, thats what i have!

bouzel · Post by **bouzel** » Mon Jun 04, 2007 5:57 pm

looks like i might have to put the alloys on hold.... post above

Arnoldo · Post by **Arnoldo** » Mon Jun 04, 2007 7:33 pm

Bepe is ur car lowered at all with ur alloys?

Bepe · Post by **Bepe** » Mon Jun 04, 2007 8:20 pm

yep about 100mm, atm, have had it down about 110mm but its to low LMAO, can get pics if you like mate

Arnoldo · Post by **Arnoldo** » Mon Jun 04, 2007 11:03 pm

Pics are needed. Mine is scrubbin my arches to the death. The tyres are goodyear eagle f1's size 195/50/R15 . Just lookin to knw what size of tyres u are runnin and if I got 195/45/R15 would this stop the scrubbing.

Cheers

Bepe · Post by **Bepe** » Tue Jun 05, 2007 8:08 am

no, it wouldnt stop the scrubbin mate, i have 165/50/15 tyres on mine mate, thats why iam able to go so low, try going for 175/40/15 and get your arches rolled, i will show you pics later mate

Bepe · Post by **Bepe** » Tue Jun 05, 2007 4:53 pm

Few Pics For you mate: