plastic radiator housing

Chat about your 9n Polo (inc GT and Fun)
Post Reply
dainott
Getting There!
Posts: 50
Joined: Wed Jun 06, 2007 10:50 am
Location: swansea

plastic radiator housing

Post by dainott »

Im not sure if anyone would know this, bit of a strange one. Ive got a 1.9 sdi polo and i had to replace the rads on it as they were damaged, but the plastic piece that the rads attach to (and then this bolts onto the slam panel) is broken so need to get one. Would anyone know if this is the same on all the mk6 polo's or would i have to get one especially for the 1.9 sdi model. Any help greatly appreciated folks.
dainott
Getting There!
Posts: 50
Joined: Wed Jun 06, 2007 10:50 am
Location: swansea

Post by dainott »

part number 6q0805588k just incase it helps
RUM4MO
Bling Bling Diamond Member
Posts: 5901
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Post by RUM4MO »

I've checked on my ETOS parts cat and this p/n covers all models up to 9N-3Y192 695 - with or without A/C irrespective of engine type. The correct name for this part is "lock carrier".
dainott
Getting There!
Posts: 50
Joined: Wed Jun 06, 2007 10:50 am
Location: swansea

Post by dainott »

cheers for the info, i had one delivered today from a salvage yard for £80 with the fan on that was knackered. VW wanted over £300 for them. Headers :roll:
Post Reply