rh cuprader wheels

danny842003 · Post by **danny842003** » Sat Jan 10, 2004 1:40 pm

intrested in buying some rh cuprader wheels just wondered if any one had any pictures of polos with them on.

Speedlaw · Post by **Speedlaw** » Sat Jan 10, 2004 2:00 pm

Sure Danny.

(7x15 ET 30 and 8x15 ET 20)

(7x15 ET 37)

Official name: RH Alurad (company) AD-Cuprad (model name), one-piece.

Website: www.rh-alurad.de

Available in 14, 15 and 16 inch diameter, and 6, 7, and 8 inch width. ET's range from 10 to 40mm, depending on the width of the wheel.

Hope that helps!

danny842003 · Post by **danny842003** » Mon Jan 12, 2004 9:52 pm

right the car im wanting to fit them to is a mk2 ibiza.
im thinking abut 15*7 with an et of 37.
what is the smallest width they do them in 16 inch?
also what tyre size do you think would be best for 15*7

Speedlaw · Post by **Speedlaw** » Mon Jan 12, 2004 10:04 pm

The minimum width on 16" diameter is 7,5".

I'm not 100% positive on what size the stock Mk2 Ibiza has, but you can calculate the correct size using this link. Ignore the 'Miata' bit, it works for all vehicles, obviously. Just fill in the current stock size, then fill in your desired size and see if it matches up. I believe a difference of 1% is within tolerance.

danny842003 · Post by **danny842003** » Mon Jan 12, 2004 10:11 pm

it has 13's on it as standered.
i ment what size tyre to go on the 15's. as in 195/50/15?
16s wont fit then as 7 is the widest an ibiza will take really.

jakethesnake · Post by **jakethesnake** » Tue Jan 13, 2004 10:32 pm

I think 195/50-15 is the correct size for a beezer on 15's.
7J width and ET37 should be no problem, I would have thought.

mchugh · Post by **mchugh** » Thu Jan 15, 2004 3:02 pm

i think there pritty sweet alloys

danny842003 · Post by **danny842003** » Sun Jan 18, 2004 11:04 pm

can anyone sugest where rh wheels can be bought?

i no of only C and R enterprises just wanna check prices etc.

mchugh · Post by **mchugh** » Thu Jan 22, 2004 12:39 pm

dont make them any more do thay?