Modders - Look at this...

LogIK · Post by **LogIK** » Sat Jan 10, 2004 5:20 pm

U may be interested...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... egory=9889

Gilex · Post by **Gilex** » Sat Jan 10, 2004 5:27 pm

And your polo will look like this:

debagded front
(16Kb/s connection will take some time load)

LogIK · Post by **LogIK** » Sat Jan 10, 2004 5:28 pm

I like it, but I prefer to spray my badge black like I have done, which is why I've passed the link on to you guys.

pettsy · Post by **pettsy** » Sat Jan 10, 2004 7:41 pm

how much are they to buy?

dub envy · Post by **dub envy** » Sat Jan 10, 2004 8:34 pm

I paid Â£30 for mine at a show in belgium.. it's FK too

amstrange1 · Post by **amstrange1** » Sat Jan 10, 2004 10:20 pm

FK ones are far superior quality to the JOM ones too...

hayesey · Post by **hayesey** » Sat Jan 10, 2004 10:48 pm

the FK ones clip into the original grill mountings dont they? were as the jom & others you need to screw on.

Gilex · Post by **Gilex** » Sat Jan 10, 2004 10:54 pm

hayesey wrote:the FK ones clip into the original grill mountings dont they? were as the jom & others you need to screw on.

You're right

Just remove the old one and replace it with the FK. that even more "plug&play" than WinXP ever will be

dub envy · Post by **dub envy** » Sat Jan 10, 2004 11:16 pm

Yup, the FK fitted just as good as VAG

camone · Post by **camone** » Sun Jan 11, 2004 9:44 am

from the picture, this looks like it will just "plug and play" Must be a new design JOM. I got an old JOM grill of Andy and it was different to this, all the clips are bigger thats why im having to modify it to fit, CHEERS andy for giving me more work

only kidding

hardhitter · Post by **hardhitter** » Sun Jan 11, 2004 12:38 pm

Yeah, I'll second the JOM de-badge grilles dont fit properly. Had one on mine for a while, and it used to catch the bonnet when closed. Very poor fit and quality in comparison to the FK ones.

LogIK · Post by **LogIK** » Sun Jan 11, 2004 2:02 pm

I still think a well sprayed black badge looks far better than the de-badged grille. However, if you want grille spoilers etc, you need the de-badged grille don't you?

Gilex · Post by **Gilex** » Sun Jan 11, 2004 2:21 pm

Well there are a few grillspoilers that leave some "space" for the badge:
http://217.7.84.246/rt/en/Modelshow/Vol ... /RE243.pdf
Take a look art D 0006013 is a grille spoiler that you can use

or what about a Kamei :
http://www.kamei.de/standards/PDFs/cs16_17.pdf

LogIK · Post by **LogIK** » Sun Jan 11, 2004 3:51 pm

I was after a grille spoiler like in the first link, but I could never find anywhere to purchase it from

. Do you know of anywhere (preferably UK based) where I can order one from?

Gilex · Post by **Gilex** » Sun Jan 11, 2004 3:57 pm

Well you could try to contact Rieger in Germany, they will ship worldwide As far as I know Rieger Germany
Or ask them were in the UK a reseller can be found