.Rear Door Cards Update [With Pics]
Rear Door Cards Update [With Pics]
I'm Having a problem with removing the rear Door cards on a 5 door.I've got to the point of taking out the door pin, and the screws out of the grab handle, and also unlocking the door cards from it's pins underneath.However the window winder gets in the way from releasing the door card itself.i've used the search button but it only has info on 3 doors .
.
Last edited by polo_dude on Thu Aug 09, 2007 2:47 pm, edited 1 time in total.
noooooooooooooooooo thats nto how it comes off. You wil break it doing that.
It works on a sliding lock mechanism.
If you look at the handle its in a few parts. you have the 'arm' and then what looks like the base. this is in fact a clip. Basically this pulls out but does nto detach from the arm. Its an odd little mechanism.
Basically grip the base and pull away from the center. if ti doesnt work in one direction try again in another. It only goes one way but i dotn think you can really tell which way to pull it. Its just trial an error. Once youve done ti once its a piece of p***. Ive done ti many many times.
It works on a sliding lock mechanism.
If you look at the handle its in a few parts. you have the 'arm' and then what looks like the base. this is in fact a clip. Basically this pulls out but does nto detach from the arm. Its an odd little mechanism.
Basically grip the base and pull away from the center. if ti doesnt work in one direction try again in another. It only goes one way but i dotn think you can really tell which way to pull it. Its just trial an error. Once youve done ti once its a piece of p***. Ive done ti many many times.
who invents such useless things. It doesn't budge. All i can see when i pull the base is a white plastic thing underneath it. Am i doing something wrong?? right whichever way the actual handle is facing, slide the plastic ring using two fingers the opposite way.
easist done in the fully closed position handle should point forwards slide the ring backwards itll just pop off.
If you could give us some tips on where to go from here though id be greatful.
whole back end of plastic panels in my 3 doors are now back front doors are holding me up
easist done in the fully closed position handle should point forwards slide the ring backwards itll just pop off.
If you could give us some tips on where to go from here though id be greatful.
whole back end of plastic panels in my 3 doors are now back front doors are holding me up
ye sure i'll make a little guide once i've pulled that ring offGomez wrote:right whichever way the actual handle is facing, slide the plastic ring using two fingers the opposite way.
easist done in the fully closed position handle should point forwards slide the ring backwards itll just pop off.
If you could give us some tips on where to go from here though id be greatful.
whole back end of plastic panels in my 3 doors are now back front doors are holding me up
okay a little update with pics!! 
right now thw first 3 steps of this update, will remove the front door cards from any polo 5dr or 3dr. Please correct me if i'm wrong:
1. Remove grab handle
Shot with VIVICAM-4345 at 2007-08-09
2. Take out the 2 screws once u have removed the outer casing of the grab handle:
Shot with VIVICAM-4345 at 2007-08-09
Shot with VIVICAM-4345 at 2007-08-09
3. Now once the scrws have been removed. Remove the door pin
Shot with VIVICAM-4345 at 2007-08-09
4. iF this guide is used for the front door cards give a good old tug on the door cards and it'll pull open
The guide will now continue for 5 door polos [Removing Rear Door Cards]
5. Remove the Ring/Base on the window winder now This is where i'm having a problem.I've moved the ring/base, but i cant remove it. I think i'm goingg wrong somehwere.I have a feeling the white pastic in the picture below is somehow ment to come out with it
Shot with VIVICAM-4345 at 2007-08-09
P.s once someone helps me to get this problem out of the way. I will be able to finish the guide for removing Rear door Cards on a 5dr polo [/b]
right now thw first 3 steps of this update, will remove the front door cards from any polo 5dr or 3dr. Please correct me if i'm wrong:
1. Remove grab handle
Shot with VIVICAM-4345 at 2007-08-09
2. Take out the 2 screws once u have removed the outer casing of the grab handle:
Shot with VIVICAM-4345 at 2007-08-09
Shot with VIVICAM-4345 at 2007-08-09
3. Now once the scrws have been removed. Remove the door pin
Shot with VIVICAM-4345 at 2007-08-09
4. iF this guide is used for the front door cards give a good old tug on the door cards and it'll pull open
The guide will now continue for 5 door polos [Removing Rear Door Cards]
5. Remove the Ring/Base on the window winder now This is where i'm having a problem.I've moved the ring/base, but i cant remove it. I think i'm goingg wrong somehwere.I have a feeling the white pastic in the picture below is somehow ment to come out with it
Shot with VIVICAM-4345 at 2007-08-09
P.s once someone helps me to get this problem out of the way. I will be able to finish the guide for removing Rear door Cards on a 5dr polo
[/b]
JoeG07 wrote:i swear you just give it a good tug put don't hold me to that as i cant remeber how i got mine off.
hmm i've tugged and pulled at everything possilbe. I'll give a go at what 8080 try and pull it the other way8080 wrote:When I had a 6n I used to push the ring the other way, away from the winder handle.
The ring should slide parallel to the handle, it's sort of gone underneath there. Maybe the white bit is supposed to go with the ring?
yeh the white bits supposed to come out aswell. youve defo got it going the wrong way there. though i dont see how the white bit couldve become detached from the black... its the white bit that acts as a clip to hold the winder on.
Perhaps that ones knackered. have you tried any of the other doors? they all detach the same.
Perhaps that ones knackered. have you tried any of the other doors? they all detach the same.