exhaust noise/cat guard? (fell off)

Chat about your MKIV (6N) Polo
Post Reply
solidsponge
Bronze Member
Posts: 155
Joined: Tue Sep 05, 2006 11:43 am

exhaust noise/cat guard? (fell off)

Post by solidsponge »

Image

This had been rattling for a few weeks, seems to be a guard for the cat? But not sure, it only looked welded on, it fell off on the motorway but only completely fell off in the helpful layby. Im not sure if its really needed or if its part of the exhaust or not a cat guard. Does anyone know if its really needed? If I get it welded chances are the welder will put a hole in the exhaust.

Anyone taken one of these off? anyone know what is ? My friends corsa only has a wire one so Im not sure if its needed for mot either.
twistedl
Getting There!
Posts: 53
Joined: Mon Oct 24, 2005 11:44 pm

Post by twistedl »

mine fell off ages ago I dont think it makes a huge difference
solidsponge
Bronze Member
Posts: 155
Joined: Tue Sep 05, 2006 11:43 am

Post by solidsponge »

ah excellent, i hope thats the case, I did another 100 miles after it fell off anyway so it seems ok in that respect.
User avatar
pip_polo
Bling Bling Diamond Member
Posts: 2454
Joined: Thu Jan 04, 2007 3:20 pm
Location: c**t Drives: Fabia vRS PD200+ ;)
Contact:

Post by pip_polo »

mine half came off and was annoyingly rattlin so i wripped it off :lol:
Pedro_Hilario
Bronze Member
Posts: 194
Joined: Wed Apr 07, 2004 2:12 pm
Location: Lisbon, Portugal

Post by Pedro_Hilario »

Hey,

I've been having an annoying rattle coming from the exhaust pipe for the past few weeks. It's driving me crazy!!

I also thought I had a crack in the exhaust, so that's why the noise was making all that rattling. But now that i think about it, it could be just this guard thingy..... since it's a metallic rattle

You reckon?

And i just get under the car and pull it out? Or i need some 'big guns', like brute force & wrench!!!


PH
warrmr
Silver Member
Posts: 335
Joined: Thu Aug 11, 2005 10:02 pm

Post by warrmr »

carefull when you pull it off if you pull to hard and dont snap the welds you will put a hole in the car and that means a blowing exhaust.
solidsponge
Bronze Member
Posts: 155
Joined: Tue Sep 05, 2006 11:43 am

Post by solidsponge »

what you can do pedro is find the guard underneath, its near the drivers side exhausty bit, get a broom handle, then rev the engine and get it to rattle, then hold the broom handle on the guard and rev the engine and if it doesnt rattle with the boom pushing against it, you know its the guard... pulling it off shouldnt be that hard, but yes be careful as you could put hole in exhaust, saying that I wish I had pulled mine off as I was doing 70 on the A1 at the time and it was busy :) for once there was a pull in park right as it happened!

Anyway good luck with that, maybe could hacksaw it off? not sure
Post Reply