newbie

Chat about your MKIV (6N) Polo
mark_4_polo
Bronze Member
Posts: 119
Joined: Thu Aug 30, 2007 10:44 pm
Location: winsford

Post by mark_4_polo »

kipper wrote:are angel eyes an mot failure then? or is it just u got the wrong ones? wats the difference between left and right hand drive angel eyes then?
not all angel eyes are, he light beam in left hand drive ones is the opposite way round to right hand ones because they should be on cars that drive on the oposite side of the road.........i think thats rite
JoeG07
Gold Member
Posts: 842
Joined: Sun Apr 08, 2007 11:42 pm

Post by JoeG07 »

ones for left hand drive cars aim right...straight at oncoming cars! ones for righthand dirve cars aim left so oncomin cars dont get dazzled, it not because theyre angel eyes that they fail mot, its because the beam pattern is way off lol.
septic
Silver Member
Posts: 288
Joined: Wed Apr 25, 2007 11:33 am

Post by septic »

Oh wicked. My car's gonna get some sic mods soon! New TSW rims and angel eyes next week!! Me so excited!!! Btw, can you guys help me with what exhausts I can get? I went to a place where they do custom exhausts....they said I needed a DTM one cause it was hassle to cut through the bumper. But I thought I'll ask you pros :P Cheers!
mark_4_polo
Bronze Member
Posts: 119
Joined: Thu Aug 30, 2007 10:44 pm
Location: winsford

Post by mark_4_polo »

septic wrote:Oh wicked. My car's gonna get some sic mods soon! New TSW rims and angel eyes next week!! Me so excited!!! Btw, can you guys help me with what exhausts I can get? I went to a place where they do custom exhausts....they said I needed a DTM one cause it was hassle to cut through the bumper. But I thought I'll ask you pros :P Cheers!

philj over on club polo sells backbozes for polos, clubpolo.co.uk

i welded a peco backbox that had been cut of a different polo and i cut my standard exhaust as it was dieing anyway and welded this backbox onto it, but its sits below the bumper so no need for trimmig the bumper

if there a decent enough place there'll do the work for you, its harder on 8v's because the bottom half of the bumpers metal and hard to cut ect etc.
septic
Silver Member
Posts: 288
Joined: Wed Apr 25, 2007 11:33 am

Post by septic »

Oh yea, thats wot the guy at the exhaust place said. Ah well, might as well pay for it.
Post Reply