considering getting tt comps again, tt comp users, advise me

Jeff GTi · Post by **Jeff GTi** » Mon Sep 17, 2007 11:48 pm

im considering another set of tt comps, as i have had them before and want that wide and squat look they provide the car with

only thing is i previously had them on with 215x40x17 tyres and they rubbed like a b***h on the arch bolt at the top of the arch

so if i get them again i would be looking at 205x40x17's to lose some width and hopefully prevent catching

but is this enough, i want to really be able to go over the bumps or give it some in the corners without it hitting the archs

is this realistic, as if not, im as well leaving it and sticking to what i have

after all, iv bought a gti and spend thousends on engine and chassis mods so i can use it properly, i dont want to have to be tamed by wheels rubbing

cheers for your input, oh, and im looking for some mint comps, know of any, give me a nod, or show me yours if your selling them

jeff

Si_GTi · Post by **Si_GTi** » Tue Sep 18, 2007 12:31 am

Hey Jeff, I remember you posting a picture of the car wearing TT Comps a while back when you first had them. Any chance you can pop another pic or two up as all the old links are broken?

Cheers

samil87 · Post by **samil87** » Tue Sep 18, 2007 12:39 am

ur car lookd good on the comps...if u hav no issues with them do it

BeezerDiesel · Post by **BeezerDiesel** » Tue Sep 18, 2007 6:07 am

The main problem with TT Comps is the offset - 32mm.
I had a set on a mk4 Ibiza a few years ago (same chassis remember) and they really sat flush with the arches, although mine wasn't lowered and thus didn't catch.
I have a set of wheels on my Polo in identical width (7.5J) but at 38mm offset and 205 tyres on there looks to be plenty of clearance, although again my car is not lowered so I can't say 100%, it just looks like it would be okay.
Incidentally the ABT wheels that I have are OEM as they were originally Audi dealer excess stock and due to the shape of spokes there looks to be masses of room if you wanted to put huge brake calipers on too. All a bit wasted on me really as I plan to keep it pretty much standard!

I think a set of mk5 Golf GTI replica alloys in 5x100 but 7x17 instead of the ickle 16 inchers on the Polo GTI would look really good, thinking about this for my next move.

Grapo · Post by **Grapo** » Tue Sep 18, 2007 6:57 am

I'd say leave it. As you said you have spent thousands on getting the car where you want driveability wise. Dont mess it up with a dodgy wheel set up.

david burton · Post by **david burton** » Mon Sep 24, 2007 8:51 pm

what have you got now?

I'm slammed on 205x40x17s and have had NO catching whatsoever once the inner arch is slightly modified (10 mins to do per side).

don't worry about rubbing, worry about things such as the harsher ride if you're on 16s

for more performance stick with 16s, for looks then get the 17s.

Jeff GTi · Post by **Jeff GTi** » Mon Sep 24, 2007 11:20 pm

what does the arch mod consist of mate?

please explain

im after the looks as the 220 hp and 260+ft/lb torques the engine is delivering can easilly deliver the power to keep it fast enough

i dont mind about the harsher ride either, im after the sexy look the tt's give it again

david burton · Post by **david burton** » Tue Sep 25, 2007 1:38 pm

then you definitely want the TTs.

It's simple, take out the bolt, pinch the metal bracket closer together (fingers or hammer will do this - gently), and then slightly snip the arch liner so you can lift it up and tuck it behind the metal tab.

leave the bolt out, the arch liner is still in place and very secure, it's just now tucked behind the metal bracket rather than in front of it and nearer the tyre.

FYI I'm running BF Goodrich tyres. Others could possibly rub?