my polo so far......

Tim_GTi · Post by **Tim_GTi** » Tue Oct 02, 2007 7:32 pm

kipper wrote:someone must know the answer to my questions about the lights and angel eyes? or do u think i should go for clear angel eyes?

def clear lights, imo tinted lights look awlful

kipper · Post by **kipper** » Tue Oct 02, 2007 11:56 pm

so u mean tinted lights look awful period or just cause my car is silver so silver lights would look better then tinted ones?

NOZ · Post by **NOZ** » Wed Oct 03, 2007 12:26 am

Tinted lights should only go on dark cars if anything close to black! The clear ones would look much better on a silver 1

Tim_GTi · Post by **Tim_GTi** » Wed Oct 03, 2007 4:16 pm

yeh i'd say pretty much period, some dark cars can get away with them but i still think they look better crystal sides and front, and all red rears, just my oppinion tho,

kipper · Post by **kipper** » Sat Oct 06, 2007 11:40 pm

for those who dont know, the type of wheels i like are the ones on my car in other words 5 spoke quite thick spokes. so naturally i indeed like these wheels..........

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=009

and am thinking of getting these if i can somehow get enough money for them. also looking for new lights front and back and was thinking of these for the back............

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=010

also these ones but thinking these might be a bit dark.........

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=004

tell me what u think......... i really like the wheels tho.....

kipper · Post by **kipper** » Sun Oct 07, 2007 9:53 pm

someone must have something to say..............

Tim_GTi · Post by **Tim_GTi** » Tue Oct 09, 2007 1:49 pm

ahh yeh borbet As, lovely alloys get them!!! Still think you should stick to the OEM lights tho

kipper · Post by **kipper** » Fri Oct 12, 2007 12:15 am

hopefully over the next couple of days you'll see the recent mods i have done. if one of them arrives soon. when i get enough money i wanna get angel eyes deep dish alloys and lower or air bag suspension. anyway watch this space....................

kipper · Post by **kipper** » Tue Oct 30, 2007 1:57 am

for my new exhaust its gonna be different. im not gonna say anything but from the question i will ask u might get an idea of wat im thinking......

where i want my new exhaust to go, my spare wheel holder is in the way, i was wondering, would it be ok if i got a hammer and dented it loads to push it up higher so i could have the exhaust where i want it or would this either damage the chassis or fail an mot?

kipper · Post by **kipper** » Tue Oct 30, 2007 11:45 pm

anyone can answer my question?

Tim_GTi · Post by **Tim_GTi** » Wed Oct 31, 2007 3:36 pm

not quite with you mate? Du mean take the spare wheel out and hack at the hole where its situated so its almost inverted?

vdubit · Post by **vdubit** » Wed Oct 31, 2007 6:49 pm

It wont fail an mot but it will seriously reduce your resale value. The best thing you could do (if you must) Is cut a section out of the wheel well and weld a section back in in a kinda upside down 'u' shape if that makes any sense.

kipper · Post by **kipper** » Wed Oct 31, 2007 11:37 pm

Tim_GTi wrote:not quite with you mate? Du mean take the spare wheel out and hack at the hole where its situated so its almost inverted?

yup pretty much.

Tim_GTi · Post by **Tim_GTi** » Thu Nov 01, 2007 2:14 am

yeh i really wouldnt do that, the same reason as Andy previously stated, it'll de-grade the value of your car if you wish to sell at any date in the future

kipper · Post by **kipper** » Thu Nov 01, 2007 5:59 pm

thats wat i thought. wat about if i got a body shop to reweld te spare wheel holder so its higher in the car? if that makes sense?

UK-POLOS.NET - THE VW Polo Forum

my polo so far......

next mod..... exhaust