Power for my Sony MD player

msmartinwsx · Post by **msmartinwsx** » Wed Feb 04, 2004 11:09 am

OK then. In my N reg polo - When I turned the engine off, I could still have the radio on full.

However, I can only do this in my 9n when the engine has been on (and the key in the ignition). As soon as I take the key out - the power is fuzzed

Anyways of getting it to stay on?

Matt

msmartinwsx · Post by **msmartinwsx** » Wed Feb 04, 2004 11:10 am

Also.

Just seen another post that has the same problem but the opposite of me

I have changed the yellow/red wires around - no joy

M

david burton · Post by **david burton** » Wed Feb 04, 2004 2:16 pm

Yours is properly wired up at the mo - to do it your way you need to take the constant power wire and feed it into BOTH terminals rather than swap em around. Do you have a multimeter? I don't know which colour is what....

msmartinwsx · Post by **msmartinwsx** » Wed Feb 04, 2004 2:51 pm

Nope I dont

M

Nelson · Post by **Nelson** » Wed Feb 04, 2004 5:03 pm

That'll have been my post then!!

Mine's is sorted now.

John.

Blk6N · Post by **Blk6N** » Sat Feb 07, 2004 4:21 pm

If it's a Sony MD then join the red wire to the same source as the yellow. The Y should be perm 12V+ and the R a switched feed from ign.

Or leave the key in