Raceland Manifolds

Chat about your MKV (6N2) Polo
Post Reply
User avatar
h4r1s
Platinum Member
Posts: 1309
Joined: Tue Mar 21, 2006 4:10 pm
Location: Leicester/Sheffield Drives: Polo MKV-6N2 1.4SE 16v 75BHP

Raceland Manifolds

Post by h4r1s »

hi,

Been looking into raceland manifolds, anyone actually have one of these on a mk5? don't even know if they do one for mk5 1.4 16v or not :? Are they worth the trouble and are they an easy fit?

Thanks, Appreciate the help

Haris
olop_chris
Sponsor
Posts: 2131
Joined: Wed Feb 01, 2006 11:15 pm
Location: Derbyshire Drives: 270bhp .:R32
Contact:

Post by olop_chris »

Yeah I know of a few people including myself who ran them on mk5 GTis...Not 100% sure for the 1.4 16v but I assume it should be fine?

I gained 6bhp with one of these on....not loads...but not bad on a N/A engine!
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

olop_chris wrote:Yeah I know of a few people including myself who ran them on mk5 GTis...Not 100% sure for the 1.4 16v but I assume it should be fine?

I gained 6bhp with one of these on....not loads...but not bad on a N/A engine!
How much was it all inclusive if you dont mind me asking?

Would this alter the sound at all?
CymruPolo
Not so new
Posts: 566
Joined: Mon Nov 05, 2007 10:12 pm
Location: north Wales, UK

Post by CymruPolo »

I'd be interested in that too Chris :)
JarnoVWPolo6N
Gold Member
Posts: 878
Joined: Sat May 28, 2005 2:31 pm
Location: Holland
Contact:

Post by JarnoVWPolo6N »

Got one on my mk4 8v, surely is noticeble after installment, sounds more "roaring" and isn't hard to install. Check Ebay for some bargains, see enough of them come by as biddings, and are also made for the 16v engines
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

JarnoVWPolo6N wrote:Got one on my mk4 8v, surely is noticeble after installment, sounds more "roaring" and isn't hard to install. Check Ebay for some bargains, see enough of them come by as biddings, and are also made for the 16v engines
is it alot louder? I'm not one for waking up next town over's entire OAP house residents!

How much did you pay for yours?
User avatar
h4r1s
Platinum Member
Posts: 1309
Joined: Tue Mar 21, 2006 4:10 pm
Location: Leicester/Sheffield Drives: Polo MKV-6N2 1.4SE 16v 75BHP

Post by h4r1s »

Phil J is selling them on clubpolo for £155 delivered, so definately worth the hassle then? did you keep your cat back on with the manifold, because i cannot be asked with all this swapping it over for MOT time :roll: and the only other thing i need some info is how hard fitting is? or how much it would cost to get it installed properly from an exhaust place?

cheers, Haris
JarnoVWPolo6N
Gold Member
Posts: 878
Joined: Sat May 28, 2005 2:31 pm
Location: Holland
Contact:

Post by JarnoVWPolo6N »

No, it's not a lot louder, only when you push your gaspedal to the floor :wink:

Installment is not that hard, does will require some welding, so going to a specialist is adviceble if you don't have tools of your own or at a m8s
olop_chris
Sponsor
Posts: 2131
Joined: Wed Feb 01, 2006 11:15 pm
Location: Derbyshire Drives: 270bhp .:R32
Contact:

Post by olop_chris »

Right, Its not a lot louder at all really I found. I think I picked mine up between £150-170 but that was off a guy on clublupo who had one for sale...

I took mine to a specialist to get it fitted. Took a whole day! I kept my Cat on too...but with the raceland you have to have the downpipe made to move around something thats in the way (cant remember what to be honest, was a while ago) but exhausts UK in sheffield did the trick.

Just so you know, they're quite 'ticky' when driving due to the thinner metal...so exhaust wrap is always advisable...but I didnt bother...the noise is not that loud to be honest!
User avatar
h4r1s
Platinum Member
Posts: 1309
Joined: Tue Mar 21, 2006 4:10 pm
Location: Leicester/Sheffield Drives: Polo MKV-6N2 1.4SE 16v 75BHP

Post by h4r1s »

Thanks for the info guys, appreciate it :D if you don't mind me asking Chris how much did exhausts uk in sheffield charge? and any ideas on how much it would cost to get it heat wrapped as well? oh and was the rest of your exhaust system standard? Sorry about all these questions :oops:

Thanks, Haris
olop_chris
Sponsor
Posts: 2131
Joined: Wed Feb 01, 2006 11:15 pm
Location: Derbyshire Drives: 270bhp .:R32
Contact:

Post by olop_chris »

I believe they charged me £90 and spent almost the whole day working on it for some reason! To get it heat wrapped by them is very expensive...So i opted to buy my own heat wrap (cant remember how much) but you can pick it up on Ebay or Demon Tweeks etc for not too much I think.

And yes, the rest of my exhaust system was standard.

Cheers,Chris
Post Reply