Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Chat about your MKV (6N2) Polo GTi
gazmangti
Getting There!
Posts: 75 Joined: Thu May 10, 2007 7:34 pm
Post
by gazmangti » Mon Dec 10, 2007 6:23 pm
have had to change the wheel bearings on the back on your gti's. My car has just ticked over 52k and now its in need for wheel bearings
thedees1
Sponsor
Posts: 268 Joined: Fri Feb 24, 2006 3:41 pm
Location: edinburgh/livingston, drives: polo gti red 5dr
Post
by thedees1 » Mon Dec 10, 2007 9:22 pm
changed mine at around 50k they were in a very bad state. they come with the hub, the only hard part was getting the nut off
my front ones are now in a really bad condition
tomo87
Platinum Member
Posts: 1579 Joined: Mon Dec 12, 2005 8:48 pm
Location: Dorset
Contact:
Post
by tomo87 » Mon Dec 10, 2007 10:56 pm
you can tell as long as you can hear!!!!
i had to change 1 of mine at 65k
CymruPolo
Not so new
Posts: 566 Joined: Mon Nov 05, 2007 10:12 pm
Location: north Wales, UK
Post
by CymruPolo » Mon Dec 10, 2007 11:00 pm
I had to change the front left one.
And as Tom said, if you can hear you will know when the bearing needs changing. It's very loud.
Tim_GTi
Post Whore
Posts: 12289 Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:
Post
by Tim_GTi » Tue Dec 11, 2007 2:49 am
Changed my rear drivers side at bout 39k.
You can tell by the load whirring sound that builds up with speed but doesnt going away if the clutch is suppressed. Basically the faster you are going the louder it will be
sorted
Gold Member
Posts: 794 Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow
Post
by sorted » Tue Dec 11, 2007 2:47 pm
Done 2 rear ones on my last polo, done 2 front ones on the GTI (they were noisey i had the whole hub off and though maswell do it while im here)
Neil
Bepe
Platinum Member
Posts: 1575 Joined: Wed Sep 06, 2006 11:12 am
Post
by Bepe » Tue Dec 11, 2007 4:58 pm
dont think my 1.0 has ever had a change of wheel bearings lol, its at 82k