exhaust for 1.4 tdi *edited with pics*

pip_polo · Post by **pip_polo** » Sun Dec 30, 2007 5:33 pm

ok well i tried and failed to put a fabia vrs exhaust on.

in the mean time f*cking up my back box.

so wondering if anyone could recamend one.

a nice looking one that will fit into the cut out on my bumper.

standard GTI one i've hurd about?? lol

i'll take a pic of my 'creation' which is ghay tbh lol

cheers

Post by **alexperkins** » Sun Dec 30, 2007 6:04 pm

Lol what on earth did you do?!

K.I.T.T. · Post by **K.I.T.T.** » Sun Dec 30, 2007 7:07 pm

Is your cat still intact? If so, why not just have a straight through? Apparently the noise levels aren't much higher higher without the back box and it'll make your exhaust system less restrictive

Ash

pip_polo · Post by **pip_polo** » Sun Dec 30, 2007 11:21 pm

na i want it to be standard looking.
i don't want sound or anything chavvy.

alex - i did exactly what i said i would.
hack them both up to make one..

it looks mint. just on the p*** a little.
and smacks my lower bumper on big bumps
(maybe due to last bracket no been on

)
it's safe, just slightly lopsided.

i'll take some pics tomor when it light.

any info on any back boxes that are cheap then?
(and don't need to be modded to fit

cheers

Post by **alexperkins** » Mon Dec 31, 2007 12:19 am

lol just adapt what youve done and bracket it

cant wait to see the pics - could be unique!

pip_polo · Post by **pip_polo** » Mon Dec 31, 2007 12:33 am

it is.

i'll take some detailed pics and explane whats gone wrong

is the GTI exhaust from a new shape polo a straight fit?

pip_polo · Post by **pip_polo** » Mon Dec 31, 2007 3:37 pm

ok heres some pictures of what i did and how slanted the tip was.

close up.. bit mucky tbh lol

and then i got my face and hands dirty again and fixed it.
still slightly slanted but not really that noticable.

this last pic shows how nice it is tbh

what you guys think?

cheers

TDI_Burd · Post by **TDI_Burd** » Mon Dec 31, 2007 4:33 pm

I think its suits it mate

ive got a wee twin square exit on my tdi and its not too noisy just nice

c

GaryUK · Post by **GaryUK** » Mon Dec 31, 2007 4:54 pm

That doesn't look too bad, you could always get a rear gti skirt which has more of a cut out for the exhaust?

pip_polo · Post by **pip_polo** » Mon Dec 31, 2007 6:43 pm

cheers.

i'm just going to get the lower part colour coded now.
how much is the gti lower bi with the larger space?

cheers :]

ihpj · Post by **ihpj** » Wed Jan 02, 2008 10:35 pm

TBH it looks quite nice mate. Seems like you managed to recover a botch-job in the end? Not sure about you needing reversing sensors man

Even my Mum with her dodgy eyesight manages to reverse the Polo without issue

pip_polo · Post by **pip_polo** » Wed Jan 02, 2008 10:45 pm

the sensors came with the car

and for somereason wasn't c/coded.
but that'll change in the next few weeks

TDI_Burd - what exhaust do you have? you got any pics of it and info on it.

cheers

TDI_Burd · Post by **TDI_Burd** » Thu Jan 03, 2008 5:06 pm

Will get some pics of it for you and post them here

pip_polo · Post by **pip_polo** » Thu Jan 03, 2008 5:30 pm

cheers.

if the GTI lower valance thing is cheap enough and a straight swap i'll get that, it'l also be cheaper to spray as wont need much if any prep work on it.
cheers for reply guys

ihpj · Post by **ihpj** » Thu Jan 03, 2008 8:51 pm

pip_polo wrote:the sensors came with the car

You know I only joke

Car looks very nice with the exhaust and colour-coded will be that much sharper.

UK-POLOS.NET - THE VW Polo Forum

exhaust for 1.4 tdi edited with pics

exhaust for 1.4 tdi edited with pics