do right hand drive angel eyes exist?

JoeG07 · Post by **JoeG07** » Mon Dec 10, 2007 3:34 pm

Now its dark the majority of the time, im getting a bit fed up of my damn left hand drive angel eyes that dazzle everyone. Do right hand drive ones exist, or am i gonna have to put up with these menaces?

Mk4 Polo MPI · Post by **Mk4 Polo MPI** » Tue Dec 11, 2007 2:07 pm

http://www.body-kit.co.uk/acatalog/volk ... ights.html this help matey?

8080 · Post by **8080** » Tue Dec 11, 2007 7:34 pm

It's a long shot, but you might be able to switch the plates inside the projectors around. Might help a bit, but not solve the problem completely

Code: Select all

RHD plates are like this, to light up the ditch

DITCH              OTHER CARS
________
Metal   \_______
Metal Metal Metal

BULB


LHD plates are like this

DITCH              OTHER CARS
       ___________
______/ Metal
Metal Metal Metal

BULB

i know this looks mental, but anyways...

tomo87 · Post by **tomo87** » Fri Dec 21, 2007 12:20 am

i had RHD angel eyes on my mk4.....i had the 2piece black FK ones

kipper · Post by **kipper** » Fri Dec 21, 2007 1:52 am

http://www.orange-tuning.com/shop/light ... _1291.html

this might help................

eileenk · Post by **eileenk** » Wed Jan 02, 2008 5:35 pm

there are several authentic RHD angel eyes for sale on ebay was just looking at them

septic · Post by **septic** » Wed Jan 02, 2008 11:03 pm

Mine are RHD

mmh · Post by **mmh** » Wed Jan 02, 2008 11:12 pm

I know you can get the one piece headlamps eg. the Ultra ones with the integrated indicator in RHD or LHD as they often have a lever to adjust them.

Can anyone confirm for sure that you can get the FK glass fronted angels or powerlook lights with separate indicator in RHD for the 6n? I know the 6n2 versions of these have a LHD to RHD adjuster lever.

I've seen many sellers on eBay etc. say they are RHD but I contacted Rimstyle a FK official UK dealer who said for the Polo 6n they were only in LHD.

I've heard rumours there is a way to mod them but I have not found any definitive details on this...can anyone shed some light, as it were

Thanks,
M

JoeG07 · Post by **JoeG07** » Thu Jan 03, 2008 12:25 am

nearest i found out was

Take the 4 skrews out the glass eye thing comes off, and the plate is rite there, flik is over and atatch glass eye thing, then scrape of the old sealent, and put plastic lens back on puting sealent on the seal, re-clip and job is good one.

mmh · Post by **mmh** » Thu Jan 03, 2008 12:52 am

JoeG07 wrote:nearest i found out was
Take the 4 skrews out the glass eye thing comes off, and the plate is rite there, flik is over and atatch glass eye thing, then scrape of the old sealent, and put plastic lens back on puting sealent on the seal, re-clip and job is good one.

Hi,

Have you got a link to that info?

Cheers