Will PCD 100, ET 49 fit my 1998 Polo?

Chat about your MKIV (6N) Polo
Post Reply
Bridiemcrae
New
Posts: 1
Joined: Mon Jan 28, 2008 9:04 am

Will PCD 100, ET 49 fit my 1998 Polo?

Post by Bridiemcrae »

Good morning,

I have found a set of alloys which are off a corsa, the ET is 49 but I don't know if these would fit my 1998 polo?

Can someone please confirm if these would fit thanks?!

Thanks in advance, Alan.
polo gangsta
Bronze Member
Posts: 141
Joined: Tue Jun 05, 2007 6:23 pm

Post by polo gangsta »

think they should mate, because think vauxhall and vw have same pcd but just to check, ask him if its 4 x 100 because thats what yours will be
R1CH
Platinum Member
Posts: 1099
Joined: Mon Jun 06, 2005 1:06 pm
Location: Leeds/Huddersfield

Post by R1CH »

check the centre bore too,,,if its too big then youll need spigot rings if its too small then they wont go on.
User avatar
NOZ
Platinum Member
Posts: 1652
Joined: Fri Feb 02, 2007 11:43 am
Location: East London
Contact:

Post by NOZ »

Not sure how the ET would effect the car although I do know 35-38 is just a recommendation which no one listens to anyway. The centrebore needs to be 57.1 to fit dubs, if not then rings are necessary.
Mk4 Polo MPI
Getting There!
Posts: 69
Joined: Fri Nov 09, 2007 11:11 am
Location: Uttoxeter (20 mins from Alton~Towers)

Post by Mk4 Polo MPI »

mate just had confirmation these should go straight on!!
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Post by bstardchild »

Mk4 Polo MPI wrote:mate just had confirmation these should go straight on!!
You have corsa wheels fitted to yours or know someone who has?
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Post by bstardchild »

NOZ wrote:Not sure how the ET would effect the car although I do know 35-38 is just a recommendation which no one listens to anyway. The centrebore needs to be 57.1 to fit dubs, if not then rings are necessary.
The ET is very important and people should bear it in mind when considering wheels

Centre bore is also important but spigot rings will only take up clearance and will not compensate for a centrebore which is too small

ie if vauxhall centrebore is 55 they won't fit without some machining work

I wrote something on ET's and wheels fitting a while back I'll see if I can find it :roll:
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Post by bstardchild »

User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Post by bstardchild »

http://stores.ebay.co.uk/PERFORMANCE-WH ... Guide.html

Page down to Corsa in the Vauxhall section
Post Reply