GTI with Teledials on

Chat about your MKV (6N2) Polo GTi
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

GTI with Teledials on

Post by sorted »

Everyone think ? Dunno if im keen on them..
Last edited by sorted on Thu Feb 21, 2008 3:24 pm, edited 1 time in total.
Redline
Sponsor
Posts: 1641
Joined: Tue Jan 28, 2003 9:43 pm
Drives: BMW 128ti
Location: County Durham
Contact:

Post by Redline »

Hmm I'm not convinced, not by that photo anyway.

Tyres look quite chunky.
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

Redline wrote:Hmm I'm not convinced, not by that photo anyway.

Tyres look quite chunky.
195 45 15

I will get a few pictures when i get time. unsure if i like them so might sell them on.
User avatar
h4r1s
Platinum Member
Posts: 1309
Joined: Tue Mar 21, 2006 4:10 pm
Location: Leicester/Sheffield Drives: Polo MKV-6N2 1.4SE 16v 75BHP

Post by h4r1s »

was expecting it to look better, but i think the tyres make the wheels look smaller, i think you need some 165's :wink:
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

h4r1s wrote:was expecting it to look better, but i think the tyres make the wheels look smaller, i think you need some 165's :wink:
TBH nah. I didnt want Bridgestone Protenzas.

I only got the wheels on today here is the rest of the pics. Im thinking about selling them though.
Last edited by sorted on Thu Feb 21, 2008 3:24 pm, edited 1 time in total.
User avatar
NOZ
Platinum Member
Posts: 1652
Joined: Fri Feb 02, 2007 11:43 am
Location: East London
Contact:

Post by NOZ »

Teledials always look smaller then they already are because of the lip. So getting thinner profile tyres along with a slight stretch helps it. I think the RXII's look better then them though. Think there's a set of D90's on sale by 'Dublife' over at Dub-London.
ModifiedMadness
Sponsor
Posts: 6769
Joined: Tue Jun 14, 2005 8:38 pm
Location: Bedford Drives: MK5 Golf R32

Post by ModifiedMadness »

I'm not too keen to be honest mate
MaxZ
Platinum Member
Posts: 1472
Joined: Mon Apr 10, 2006 10:20 am
Location: North London
Contact:

Post by MaxZ »

I think you need 165/50s to pull them off. And to be very very low
olop_chris
Sponsor
Posts: 2131
Joined: Wed Feb 01, 2006 11:15 pm
Location: Derbyshire Drives: 270bhp .:R32
Contact:

Post by olop_chris »

They're not too bad to be honest, but is it me? or does that first picture with the rear wheel look abit...'egg shaped'?
dino
Sponsor
Posts: 3023
Joined: Wed Jun 08, 2005 11:59 am
Location: Milton Keynes

Post by dino »

ModifiedMadness wrote:I'm not too keen to be honest mate
+1

Prefered the alloys in your sig.
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

Looks like the G60's are coming back out for a while then while i sell these :lol:
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

olop_chris wrote:They're not too bad to be honest, but is it me? or does that first picture with the rear wheel look abit...'egg shaped'?
Think its just the photo mate when i fitted the tyres today they were fine 8)
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

MaxZ wrote:I think you need 165/50s to pull them off. And to be very very low
Cant get it any lower becoz the driveshaft on the driver side is hitting the chassis !
MaxZ
Platinum Member
Posts: 1472
Joined: Mon Apr 10, 2006 10:20 am
Location: North London
Contact:

Post by MaxZ »

Bah.. it's just a small constraint. Get yourself a grinder and go lower
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

Sorry mate, I have to agree with the above comments. I don't like them on the GTi!

The wheels themselves look quite good though, tidy job.

Cheers
Post Reply