Backbox for Mk3

Chat about your MKIII (86C) inc GT/G40 Polo
Post Reply
LogIK
Silver Member
Posts: 440
Joined: Wed Dec 10, 2003 4:31 pm
Location: Burnage, Manchester

Backbox for Mk3

Post by LogIK »

Hi everyone.
I would really like a nice, LOUD backbox for my Mk3. I don't want anything fancy like a complete custom exhaust system, I just want the backbox, but I need your advice.
Can anyone advise me of places where I can look for one, that is specific to the Mk3, so its simply a case of out with the old and in with the new, with no modifications. It would be handy if you could suggest something nearby. Also, I'm looking to keep below £100 :? can you help?
Thanks.
LogIK
Silver Member
Posts: 440
Joined: Wed Dec 10, 2003 4:31 pm
Location: Burnage, Manchester

Post by LogIK »

Oh yeah, wot about a DIY job, so I can make my original backbox loud?
DanW
Gold Member
Posts: 551
Joined: Tue Dec 30, 2003 2:09 pm
Location: Aberystwyth

Post by DanW »

I think Dan (Hardhitter) can sort you out there m8. I may be getting a de-catted down pipe from him within the next few weeks
hardhitter
Moderator
Posts: 1249
Joined: Mon Oct 14, 2002 10:35 pm
Location: Derbyshire 3F Guru
Contact:

Post by hardhitter »

Theres not much you can get for under £100. I think the Ashley Mk 2 backbox might be around £90, but that the only one. The rest are over £100.
Have a look on ebay theres a Jetex going cheap.
dub envy
Moderator
Posts: 1431
Joined: Mon Jun 16, 2003 10:52 pm
Location: Dan Saaf Drives: Pirelli ed. Coupe

Post by dub envy »

I'm gonna be getting a new backbox this summer.
LogIK
Silver Member
Posts: 440
Joined: Wed Dec 10, 2003 4:31 pm
Location: Burnage, Manchester

Post by LogIK »

Thanks Dan. I did have a go at looking on eBay, but I wouldn't really know wot I'm looking for, exept for typing "Polo Backbox" which returns hardly any results anyway. Maybe you could help me here, as I'm not well informed on exhaust systems at all :?
KarlM
Bling Bling Diamond Member
Posts: 2353
Joined: Mon Oct 14, 2002 11:11 pm
Location: Sheffield
Contact:

Post by KarlM »

If you dont mind travelling to Bradford i can put you in touch with a guy that will make you a custom back box for £150 notes
hardhitter
Moderator
Posts: 1249
Joined: Mon Oct 14, 2002 10:35 pm
Location: Derbyshire 3F Guru
Contact:

Post by hardhitter »

LogIK
Silver Member
Posts: 440
Joined: Wed Dec 10, 2003 4:31 pm
Location: Burnage, Manchester

Post by LogIK »

Cheers. I had that in my Watch list on eBay, but it looked a little tatty to me :? not too sure bout it, wot u think?

There is a Powerflow garage about 20mins away from me in Bolton. Worth getting a quote off them?

Thanks for all the help up to now :)
LogIK
Silver Member
Posts: 440
Joined: Wed Dec 10, 2003 4:31 pm
Location: Burnage, Manchester

Post by LogIK »

Anyone Else? :?
concept-e
Bronze Member
Posts: 105
Joined: Mon Dec 29, 2003 1:24 pm
Location: Croydon, London

Post by concept-e »

Powerflow will rape you on price! If you want a decent sound, well the nicest note ive heard is from Longlife exhausts. But once again they are custom stainless steel and mine cost £200. You could get a tailpipe trim from Halfords etc, weld it onto an original backbox, couple of coats of heat-proof paint, a polish to give it that pro-look and you have a ("custom"!) backbox!!! Then weld it back onto your orginal system. Not sure how that would sound though!!

Try your nearest scrappy if anything else. Demon Tweeks are worth a try, although they told me all I could get was a Jetex full system. But at £195 that wasn't bad.

Steve
Tahrey1043
Bling Bling Diamond Member
Posts: 5184
Joined: Thu Sep 18, 2003 1:15 am
Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
Contact:

Post by Tahrey1043 »

If you just want loud.... get a claw hammer and use the sharp end to make some holes in the one you've got.

There's loud... and there's LOUD :lol: Plus it'll sound more like a large V6 than a small straight 4.

(why waste money? its all the same effect)
Post Reply