d

Chat about your MKIII (86C) inc GT/G40 Polo
Post Reply
dpower
Getting There!
Posts: 77
Joined: Wed Feb 21, 2007 8:08 pm

d

Post by dpower »

ddd
Last edited by dpower on Sun Apr 27, 2008 2:53 pm, edited 1 time in total.
jonboy
Getting There!
Posts: 99
Joined: Tue Nov 20, 2007 1:32 pm
Location: oxfordshire

Post by jonboy »

only 2 things spring to mind, early signs of head gasket failure and possibly a failed thermostat.
try removing the thermostat and see if that improves things. its only held by 2 bolts and takes about 5 mins to do
dpower
Getting There!
Posts: 77
Joined: Wed Feb 21, 2007 8:08 pm

Post by dpower »

thanks mate. will def have a look over the weekend. do u have an idea on the price for either of those as this is all a bit a new to me.
jonboy
Getting There!
Posts: 99
Joined: Tue Nov 20, 2007 1:32 pm
Location: oxfordshire

Post by jonboy »

stat is around £20 for the part, but its an easy diy fit.
head gasket: parts again are cheap, but personally i would get it pro done, also get a new water pump and cambelt at the same time, as the pump acts as the tensioner for the belt and seing as the belt has to come off due to the head you might as well change them.
if the head is fine your looking at 350 to 400 have have it fixed by a decent garage. if theres head damage expect the bill to be a few hundred larger!
dpower
Getting There!
Posts: 77
Joined: Wed Feb 21, 2007 8:08 pm

Post by dpower »

damn. ok, will have it seen to 2mo. thanks again.
Post Reply