Brakes 312

Chat about your 9n Polo (inc GT and Fun)
Post Reply
Polooo
New
Posts: 8
Joined: Thu Apr 10, 2008 11:07 pm

Brakes 312

Post by Polooo »

Hello!

I'm new here

I have searched whole Google and i came up with O...
I have polo 9n tdi 74 kw(ATD) and I'm planing to change the original brakes with 312x25...i've alreaady bougt the brake sistem form S3 but the problem is that calipers cannot be mounted on original "swing arm...Has any1 done this , because i heard that older polos have simililar "construction...for any kind of information i will be grateful
david burton
Bling Bling Diamond Member
Posts: 3082
Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:

Post by david burton »

you will need new front hubs in order to fit your brakes - you can get the Fabia VRS / Polo GT TDI / 9N3 GTI hubs and these should work.

there's an article on it on a skoda site somewhere - that might be google-able!
Polooo
New
Posts: 8
Joined: Thu Apr 10, 2008 11:07 pm

Post by Polooo »

but the hubs from Polo gti fit to polo 9n tdi?(ATD) i looked at etka but im not sure...so if they fit i shouldn't have no problem fitting the S3 brakes?
Some1 told me that i would also have to change the "bearings"...1OO pound per piece :?
pidge87
Getting There!
Posts: 77
Joined: Thu Apr 13, 2006 1:16 am

Post by pidge87 »

No i told you you would have to replace the hubs! :lol:

Quite obviously you werent listening though :!:

On a side note you could replace the wheel bearings while you were doing it :lol:
Polooo
New
Posts: 8
Joined: Thu Apr 10, 2008 11:07 pm

Post by Polooo »

pidge87 wrote:No i told you you would have to replace the hubs! :lol:

Quite obviously you werent listening though :!:

On a side note you could replace the wheel bearings while you were doing it :lol:
i know i have to change them...but will they fit to my car?like you would told me i have to change the hub from lambo....problem is "will they fit"
pidge87
Getting There!
Posts: 77
Joined: Thu Apr 13, 2006 1:16 am

Post by pidge87 »

Yes the HUBS from a 9n GT/9n3 GTI/Fabia VRS/Ibiza Cupra/Ibiza FR will all fit!
Polooo
New
Posts: 8
Joined: Thu Apr 10, 2008 11:07 pm

Post by Polooo »

pidge87 wrote:Yes the HUBS from a 9n GT/9n3 GTI/Fabia VRS/Ibiza Cupra/Ibiza FR will all fit!
thanks :wink:

P.S

Is hub from Golf IV same as hub from polo Gt , Gti....
pidge87
Getting There!
Posts: 77
Joined: Thu Apr 13, 2006 1:16 am

Post by pidge87 »

No.

I thought that aswell but a friend of mine who works for VW cleared that up :lol:
Polooo
New
Posts: 8
Joined: Thu Apr 10, 2008 11:07 pm

Post by Polooo »

pidge87 wrote:No.

I thought that aswell but a friend of mine who works for VW cleared that up :lol:
Do you maybe know some owner of Polo who has 312 mounted on?
RUM4MO
Bling Bling Diamond Member
Posts: 6069
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Post by RUM4MO »

Polooo wrote:
pidge87 wrote:No.
I thought that aswell but a friend of mine who works for VW cleared that up :lol:
Do you maybe know some owner of Polo who has 312 mounted on?
As suggested, nip across to www.briskoda.net and find out what the Fabia people have been doing.
Post Reply