hub/wheel adapters?

M@Turner · Post by **M@Turner** » Tue Apr 15, 2008 2:28 pm

Whats the smallest size in spacing you can get with 5x100 - 5/112.

Have seen some 15mm FK ones but think that maybe too much with the alloys i'm looking at been 7x17 offset 47!!!

Can anybody share some knowledge please?

Tim_GTi · Post by **Tim_GTi** » Tue Apr 15, 2008 2:56 pm

I think 15mm will probably be fine mate.

What size tyres are you running?

M@Turner · Post by **M@Turner** » Tue Apr 15, 2008 3:14 pm

Tyres currently on are 225/45/17 but i'll change them pretty soonish for either 205/40 if i got them!

Tim_GTi · Post by **Tim_GTi** » Tue Apr 15, 2008 3:28 pm

yeh with 205/40s you should be fine, will give you a nice mean stance after lowering

Tim_GTi · Post by **Tim_GTi** » Tue Apr 15, 2008 3:29 pm

Just found this pic, you shoudl keep your alloys!

M@Turner · Post by **M@Turner** » Tue Apr 15, 2008 3:38 pm

That does look really nice, but its been done already!!!

Think thats why i want something different!!

Still unsure what i'm doing (depends on job prospects), but if i have all the info i need should i go down the mods route, it can get done really quickly!

By my reckoning, Â£1000 is roughly what it would cost for future mods!

Tim_GTi · Post by **Tim_GTi** » Tue Apr 15, 2008 5:51 pm

I worked mine out (made a little word doc on it

), and my mods list for 2008 adds up to about Â£850! and that's not budgeting for interior if I bump into any!