Polo 6n leathers

pololady · Post by **pololady** » Sun Apr 27, 2008 11:47 pm

Hi there. I got a 97 1.4 16v. I know it's very unlikely. But if anys1 got any leather seats then I would love to put them in my polo

Tim_GTi · Post by **Tim_GTi** » Mon Apr 28, 2008 4:31 am

Look out for Golf mark3 highlines, or cupras. They're your best bet

pololady · Post by **pololady** » Sun May 04, 2008 1:32 am

As in new cupras? There's some on ebay from a 2003 cupra but they are electric. Would they fit do you know?

Tim_GTi · Post by **Tim_GTi** » Sun May 04, 2008 3:24 am

Yeh Cupras,

They possibly would, i'd have to see them though, eBay link?

pololady · Post by **pololady** » Sun May 04, 2008 3:14 pm

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=008

These are the ones, what you reckon?

Tim_GTi · Post by **Tim_GTi** » Sun May 04, 2008 3:22 pm

Ahh they're from a leon, I was referring to the Ibiza.

umm my instinct would say they'd be too wide, but I don't know.

pololady · Post by **pololady** » Sun May 04, 2008 3:33 pm

oh, is there anyway of finding out?

Tim_GTi · Post by **Tim_GTi** » Sun May 04, 2008 3:40 pm

umm.. well for the fronts it's just a case of will they literally fit, because all you need is custom subframes and you can fit anything you like in there. So asking for height and width measurements, to see if they fit your car should be ok.

Backs are harder, there's a alot to think about, and the only real way of being certain is to check them out in person and size them up.

adam_0612 · Post by **adam_0612** » Mon May 05, 2008 11:00 am

would they fit a 6n2?

Tim_GTi · Post by **Tim_GTi** » Tue May 06, 2008 9:05 pm

adam_0612 wrote:would they fit a 6n2?

I reckon no, (because of the width) but doing what I said above will help confirm