lil change and a couple of questions

Chat about your MKIV (6N) Polo
Post Reply
freshblood
Bronze Member
Posts: 163
Joined: Mon Dec 17, 2007 8:22 pm
Location: Westerham, kent

lil change and a couple of questions

Post by freshblood »

right, i ave decided to make a couple of changes to my lil polol.... at the moment it is lowered 60mm all round with some wolfrace octane wheels... not reeeeli wat i wanted .... so im gonna get some smaller much wider wheels n get some spacers and possibly get some coily's..... neway as some of you know i ran into some ribbush with my wheels rubbing and kinda manged to get it fixed without rolling the arches.... neway i am definatly rolling the arches .... n just wandering if anyone knows how much it cus for the respray if the paint cracks.... lets also asume it cracks n all four corners :) ...... cheers ladz
Last edited by freshblood on Wed May 14, 2008 2:27 am, edited 1 time in total.
kipper
Platinum Member
Posts: 1240
Joined: Fri Jun 09, 2006 10:34 pm
Location: aldershot, england

Post by kipper »

funy u should mention that cause i was thinking of getting my arches rolled when i finally get to buy some new alloys as i now hve the coilies. i did look on ebay for alloys i think and came across this guy who said he does it and he een comes out to u.... try looking on ebay and see if u can find him. he said it was £40 a wheel i believe plus petrol to get him to u. unless u take it to him.
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

£100-150 for all four arches rolled.

Cracking depends on how bad it is, but your looking at 4 panels plus blending on the other surrounding, so about £200-300 on top.

Some places will charge you say £80 per arch, which includes crack repair if it were to happen.
freshblood
Bronze Member
Posts: 163
Joined: Mon Dec 17, 2007 8:22 pm
Location: Westerham, kent

Post by freshblood »

perrrfect tim cheers my man! ..... u really are a true man of knowledge!
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

No problem mate 8)

Have a search about for quotes. i found a fairly decent website for them. Neil (username sorted) had them done with these guys, I thnik it was a pretty good job too.

www.archenemy.co.uk
freshblood
Bronze Member
Posts: 163
Joined: Mon Dec 17, 2007 8:22 pm
Location: Westerham, kent

Post by freshblood »

.. yeh i found them when i searched it on google ... they look pretty gd so i myt give them a buzz :D ... fnx again :D
Post Reply