13 inch wheels!

freshblood · Post by **freshblood** » Wed May 28, 2008 12:06 am

well if u mean by hitting the floor then yes

Tim_GTi · Post by **Tim_GTi** » Wed May 28, 2008 12:26 am

How low is it? Is it a coilover kit or 60mm kit?

freshblood · Post by **freshblood** » Wed May 28, 2008 1:21 am

its a 60mm kit ....

NOZ · Post by **NOZ** » Wed May 28, 2008 1:50 am

freshblood wrote:well if u mean by hitting the floor then yes

Now thats SCENE

13's would look great with 8" width and some serious stretch. I remember recommendations being 35-38 BUT no one really listens to recommendations now do they

so the lower the offset the better stance you'll get. However, the loewr the offset then the more likely you'll have to get the outer arches rolled etc and the necessity of stretch.

Go ahead with the plan mate, would look awesome

freshblood · Post by **freshblood** » Wed May 28, 2008 4:08 pm

... just been looking at some of the superlites and where it says the offset it says 3P(110mm) any1 know what this means and if it will fit ... ? cheers

Shmosh · Post by **Shmosh** » Wed May 28, 2008 6:24 pm

i think 15s look ideal on mk4s personally. 13s are too small really, 14s look ok though.

NOZ · Post by **NOZ** » Thu May 29, 2008 3:02 pm

a decked car sitting on tiny wide rims heads towards mroe euro. To get a better stance with less issues you'd have to get smaller rims although most opt for 15's.

freshblood · Post by **freshblood** » Fri May 30, 2008 12:11 am

freshblood wrote:... just been looking at some of the superlites and where it says the offset it says 3P(110mm) any1 know what this means and if it will fit ... ? cheers

dunno if any1 saw it ...... thought if i repost it , it myt get a response lol :S

Tim_GTi · Post by **Tim_GTi** » Fri May 30, 2008 12:22 am

You got a link to where it says that dude?

freshblood · Post by **freshblood** » Fri May 30, 2008 12:24 am

http://www.superlite-wheels.com/technical.html
oops 117mm and its under backspace but ull see:D... it on the 13x8's

Dlicence · Post by **Dlicence** » Sat May 31, 2008 4:47 pm

freshblood wrote:its a 60mm kit ....

Are you sure your suspension is a 60 mm kit? because mine is an 80mm philJ kit and it doesnt bottom out, only on speed bumps. Or are you still running on original shocks?

freshblood · Post by **freshblood** » Sun Jun 01, 2008 2:33 am

.. yer pretty positive , its a full kit, wouldnt go any otherway ...... while im on this topic does any1 know if any of the suspension companies harder springs than others?

Tim_GTi · Post by **Tim_GTi** » Sun Jun 01, 2008 6:55 pm

Yeh, every company will have slightly different springs, therefore feel and ride slightly different. Obviously generally what you pay for is what you get.

I've replied to your PM