9N3 GTi Lower Grille inserts

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
adamK47
New
Posts: 13
Joined: Wed Sep 12, 2007 7:06 am

Post by adamK47 »

Hey guys,

This is Adam (who shane) was refering to upper post. I've been chatting with the guy over at the shop, if you want me to organise a groupbuy for you guys as well, I am happy to do so. Or, if you want to join ours, that's cool too!

http://www.vwwatercooled.org.au/newforu ... hp?t=16334
User avatar
charlievwp
Gold Member
Posts: 577
Joined: Fri Jul 27, 2007 4:42 pm
Location: Milton Keynes, Bucks
Contact:

Post by charlievwp »

I'm definitely interested in getting in on the group buy.

I have a small question though....
I do not have fog lights on my car - isn't there a legality that where there are fog cut-outs, there has got to be lights - otherwise it'd fail an MOT?
In which case, it might work out quite a bit more expensive :?
kc
Gold Member
Posts: 914
Joined: Wed Oct 01, 2003 2:03 am
Drives: an imaginary one... for now
Location: Up North

Post by kc »

nah you dont need fog lights there if there are holes mate

but the only worrying thing is, that on the offside grill there are no holes for the intercooler, so us gti boys and girls not running a FMIC will have to either get creative, or run without a foglight!

ive emailed the shop that runs it, but still no reply :(
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Post by KennyPOLO_Gti »

A noticed that too kc. U could start cuttin the holes out urself but think it would look a bit ruff!!

U could just fit the centre one but means u need to take off the whole front end to do that. Think the side ones just pop out. :roll:
Creedy
Bronze Member
Posts: 132
Joined: Thu Apr 24, 2008 3:48 am
Location: Philly

Post by Creedy »

I would be interested!! has anyone else made an order?
Harnz
Silver Member
Posts: 438
Joined: Thu Sep 27, 2007 6:00 pm
Location: LONDON

Post by Harnz »

if the correct ones get made i would stil be up for buying i dont want to have to start fiddling with them so i would preferr if they were done correct for every ones GTIs just incase some of us make mistakes and have to waste money getting a new set :roll:
kc
Gold Member
Posts: 914
Joined: Wed Oct 01, 2003 2:03 am
Drives: an imaginary one... for now
Location: Up North

Post by kc »

KennyPOLO_Gti wrote:A noticed that too kc. U could start cuttin the holes out urself but think it would look a bit ruff!!

U could just fit the centre one but means u need to take off the whole front end to do that. Think the side ones just pop out. :roll:
i'd just run it without the foglight to be honest mate

might look pants, but meh lol

or i could have another productive night with my hot knife and plastic weld! haha
User avatar
charlievwp
Gold Member
Posts: 577
Joined: Fri Jul 27, 2007 4:42 pm
Location: Milton Keynes, Bucks
Contact:

Post by charlievwp »

Hi Adam, Would you or someone on the site mind doing the group buy for these for us over here or would it be easier for you if we signed up and order ourselves?
I'm definitely name down for a set anyway....as long as postage doesn't cost more than the set themselves! Should we start a list?
adamK47
New
Posts: 13
Joined: Wed Sep 12, 2007 7:06 am

Post by adamK47 »

charlievwp wrote:Hi Adam, Would you or someone on the site mind doing the group buy for these for us over here or would it be easier for you if we signed up and order ourselves?
I'm definitely name down for a set anyway....as long as postage doesn't cost more than the set themselves! Should we start a list?
Hey,

I may have a few extra sets due to a few pulling out last minute. If you are interested, can you sent me an email with your address and I'll get some postage cost once it arrives here.

Its
150AUS for the whole set +postage to your house.

Email

adamk_47@hotmail.com
User avatar
charlievwp
Gold Member
Posts: 577
Joined: Fri Jul 27, 2007 4:42 pm
Location: Milton Keynes, Bucks
Contact:

Post by charlievwp »

Oooh, they jumped up a bit huh!

£73 ish for the full set instead of £43ish which is still a good price I guess, but more than we originally thought.

Does anyone have any ideas on what postage might work out as from Aus to UK? I haven't a clue on the weight ? :?
adamK47
New
Posts: 13
Joined: Wed Sep 12, 2007 7:06 am

Post by adamK47 »

charlievwp wrote:
£73 ish for the full set instead

:?
yeh, tats cuz of the exchange rate with the bank unfortntely
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Post by whitegtipolo »

email sent !!! Hope i get them!! :lol:
adamK47
New
Posts: 13
Joined: Wed Sep 12, 2007 7:06 am

Post by adamK47 »

SPOT THE DIFFERENCE :lol: 8)


Image
Image

**It's crocket cuz i was testing which one looks best. final result looks SUPERB!

Whitegtipolo - I'll get pricing on postage and will get back to you

Others - Anyone else interested? I should have 5 full set left. I can bundle the shipping to one particular person to make it cheaper

Adam
adamK47
New
Posts: 13
Joined: Wed Sep 12, 2007 7:06 am

Post by adamK47 »

more teaser


Image
Image

Image
User avatar
KennyPOLO_Gti
Platinum Member
Posts: 1552
Joined: Fri Jan 12, 2007 8:04 pm
Location: Ayrshire, Scotland

Post by KennyPOLO_Gti »

Look GOOD mate!!!

Did it come with the open vents on the IC side? Or did u got them out? :?
Post Reply