Forge Intercooler FMIC fitted

flyfs6 · Post by **flyfs6** » Sun Jul 20, 2008 11:11 am

Ok...bad news is that I can't actually get to the intercooler or the pipes to measure properly unless I jack the car up etc etc.

The intercooler approx 76mm deep and excluding the end tanks 19" wide.

I'll get more details from forge asap.

shanethb · Post by **shanethb** » Mon Jul 21, 2008 9:44 am

Can i ask how the boost lag is. ie. is there a noticible difference to when boost comes on from before the fmic.

Does that make sense.

flyfs6 · Post by **flyfs6** » Mon Jul 21, 2008 1:10 pm

Its here and its official.

Its going to be priced at Â£599 inc vat.

On the intercooler, core size is 270mm high x 480mm wide x 60mm deep. Pipework is 50mm (stock is 45mm).

Mine is a prototype so your production one should be available soon. IMO is a very good price for it. Much cheaper than what was speculated, the APR one to anywhere, one its cousin's use and all in all a great piece.

There isn't any more lag at all. It feels like there is less of it if anything, the turbo whistle's more, the car gurgle's and it goes like stink in any weather now. Plus it just looks so good.

whitegtipolo · Post by **whitegtipolo** » Mon Jul 21, 2008 6:55 pm

excellent news not a bad price after all! Cant wait!

Jeff GTi · Post by **Jeff GTi** » Mon Jul 21, 2008 7:04 pm

been on to forge today and im booked in, got the last one in the batch

they have 1 set of pipes left and the core of 1 intercooler, the one im having, so its on the list to be built over the next few days, im getting it fitted on the 7th august at forge, so quite a drive down there

the development manager chris lloyd said he wanted to save this one for a car with modified engine exhaust and software, to see the gains on a played with engine

got is at a great price too, love it, now just need to decide weather or not to have the forge logo put on the front for in between the grill slats

the kits for customers will be available in 5 ish weeks once the piping is made, as they only originally made 3 sets, so all get saving up

any opinions?

Dink · Post by **Dink** » Mon Jul 21, 2008 11:32 pm

Jeff GTi wrote:been on to forge today and im booked in, got the last one in the batch

they have 1 set of pipes left and the core of 1 intercooler, the one im having, so its on the list to be built over the next few days, im getting it fitted on the 7th august at forge, so quite a drive down there

the development manager chris lloyd said he wanted to save this one for a car with modified engine exhaust and software, to see the gains on a played with engine

got is at a great price too, love it, now just need to decide weather or not to have the forge logo put on the front for in between the grill slats

the kits for customers will be available in 5 ish weeks once the piping is made, as they only originally made 3 sets, so all get saving up

any opinions?

yeah i wanted to know what it would look like with the forge logo on behind the grill.

think i might have to get mine booked in and it seems like they aint that far from me either

Tim_GTi · Post by **Tim_GTi** » Mon Jul 21, 2008 11:58 pm

Looks awesome

whitegtipolo · Post by **whitegtipolo** » Thu Jul 24, 2008 9:01 pm

i mean look at the temp drop its unreal and on a standard map!!! I want the forge logo in red looks mint!

kc · Post by kc » Thu Jul 24, 2008 9:02 pm

nahhh man

no logo

go for sleeper.... thats just me i suppose lol

whitegtipolo · Post by **whitegtipolo** » Thu Jul 24, 2008 9:21 pm

mmmm i know what you mean but im a poser LOL

Jeff GTi · Post by **Jeff GTi** » Thu Jul 24, 2008 11:11 pm

mine is to be with no badge, like kc says, wolf in sheeps clothing, and will attract less attention from the old bill