Offset on 13 inch weller steels ?

samchatt · Post by **samchatt** » Thu Aug 07, 2008 9:47 am

Thinking of buying 13 inch black wellers which are 8 inch wide. i saw that the offset is ET-10 . . . dont know anything bout offset's so dont know if i bought these if they would be ok or will i have to make changes for example spacers ? btw i'm lowering the car basicly to the floor or quite close to.

Thanks

Sam

NOZ · Post by **NOZ** » Thu Aug 07, 2008 11:22 am

basically the lower the offset, the more it'd stick out from your arch. Its a measurement of from the centre of the rim to the outer edge.

Mike · Post by **Mike** » Thu Aug 07, 2008 11:35 am

http://www.1010tires.com/WheelOffsetCalculator.asp

samchatt · Post by **samchatt** » Thu Aug 07, 2008 3:04 pm

Oh so as the offset on 13 inch by 8inch weller wheel is ET-10 does that mean it will stick out 10 mm of the arch ? sorry for the silly question bit of novice this advise really helps

samchatt · Post by **samchatt** » Thu Aug 07, 2008 8:40 pm

Bump

samchatt · Post by **samchatt** » Tue Aug 12, 2008 7:44 pm

anyone ? lol just would like to know if the offset is ET-10 does that mean it will stick out 10mm or 10cm or what ?

Thanks

Sam