Polo 6n2 GTi Grill - 6n

Sam3352 · Post by **Sam3352** » Tue Aug 26, 2008 1:09 am

Will this fit on my Mk4 (1998) 6n Polo?

From VagParts:
https://sslrelay.com/s74326199.oneandon ... 651K01C=29

Any guides out there not that i assume its that hard tbh?

Thanks

Torq-Al · Post by **Torq-Al** » Tue Aug 26, 2008 9:13 am

In short, No! If you look at the 6n2 its got a little half moon cut out of the centre of the front edge of the bonnet to accomodate the larger VW badge.

If you're after a GTI style mesh grille you'll find a few on ebay, although none come with any badges.

Polo Mesh Grille on Ebay

That'll give you an idea, got mine 2nd hand off ebay for 16 quid inc postage. Bought an R-line badge for it, see my Sig below for how it looks.

Sam3352 · Post by **Sam3352** » Tue Aug 26, 2008 12:13 pm

hmmm, ive looked on ebay and thats always been the problem, i think i want the VW on the front.

In the picture it doesnt look like it comes above that much, when ive got some extra cash and ive got a few bits cleaned up i mgiht get it and try to see if i can fit it, can always flog it off on ebay

and chuck back in the original.
ALso i might get one of ebay (debadged) and get my 'Polo' badge on the front of it.
Think ive seen a picture of it before, somewhere.

Torq-Al · Post by **Torq-Al** » Tue Aug 26, 2008 1:32 pm

Look at this pic of a 6n2 GTI & you can clearly see the notch out of the bonnet, above the badge.

Hope that helps you.