Seat LeonCupra - Seats?

Sam3352 · Post by **Sam3352** » Wed Aug 27, 2008 1:49 pm

Ive heard some Seat Seats fit into the Mk4 do these ones?
Back and front looking at getting some, found a good deal.

Thanks

Oh yeah and some pictures (Just incase someones asks?)

Front

Back

randomage · Post by **randomage** » Wed Aug 27, 2008 1:54 pm

fronts should fit with a little tinkering from what ive heard, but i think the back bench is too wide for the 6n. hope this helps, and also that someone who actually knows something answers as well!!!

Tim_GTi · Post by **Tim_GTi** » Wed Aug 27, 2008 1:57 pm

It's the mark3 Ibiza seats that fit pretty much straight in. I thnik those are Leon seats.

The back probably is a little too wide, but you enver know. i'm sure you could get the fronts in with a bit of effort though.

Sam3352 · Post by **Sam3352** » Wed Aug 27, 2008 2:28 pm

how much effort?

lol

What would it involve doing?

Thanks

Tim_GTi · Post by **Tim_GTi** » Wed Aug 27, 2008 2:33 pm

Best thing to do is get them measured. Length width height, to see if they literally fit in your polo. If they do, you could get custom subframes made up for them. So the seats fit on your current rails.

The rear bench is a little more complicated. There's alot more dimensions that have to be spot on to get it to fit. I very much doubt it will, but again get it measured up.

Torq-Al · Post by **Torq-Al** » Wed Aug 27, 2008 3:03 pm

As Tim says, mk3 Ibiza seats are the easy & straight forward fit. mk3 Golf, the front seats fit straight in & the rear seats apparently need a small amount of tinkering!

As for the Leon seats (saw 'em on ebay!), not seen them fitted. However all you have to is make the sub frame from your seat fit the Leon. A lot of work, & to be honest, yes they are recaro style, they're not that nice looking!