Coilovers now fitted :) Pics up

Chat about your MKIV (6N) Polo
User avatar
polo_dude
Gold Member
Posts: 519
Joined: Tue Oct 24, 2006 5:37 pm
Location: NW London

Post by polo_dude »

Haha, i'm agreeing with vw-po-low, 13's FTW

And as everyone else said, make sure you get some pics up!!
User avatar
Dan 6N
Silver Member
Posts: 262
Joined: Wed Mar 19, 2008 8:43 pm
Location: Kent, UK

Post by Dan 6N »

Tim_GTi wrote:
Dan 6N wrote:I'm jealous! Really want to lower the Polo but I have no money :lol:
It's most definitely the first thing you should do 8)
I'm working on it :D Trouble is, there's a nightmare speed bump at school and I don't reckon I could go much lower without having problems when going over it especially with a full car :(
Rupie
Bronze Member
Posts: 168
Joined: Wed May 07, 2008 10:03 pm
Location: York

Post by Rupie »

some piccies now ive got them fitted, only gone down about 40mm so far, ill wait until they bed in then readjust them. Fitting took about 20 mins each on the back and nearer an hour each on the front.
No ones seemed to mention the need for spring clamps on the front ones when fitting, this lengthened the whole job abit as m,y jack broke half way through so i had to pop back to my mates( who was giving me a hand) to get a trolly jack and his spring clamps. lol
anyway, let me know what you all think to the pics, i know many of you think it should be lower, :lol: but there are some killer speed bumps round here so ill drop it bit by bit, wanna keep it drivable as i daily have to drive over some nasty speedbumps :(
Image
Image
Image
Image
Image
Josh_polo
Gold Member
Posts: 946
Joined: Mon Sep 10, 2007 10:05 pm
Location: Bexleyheath,kent
Contact:

Post by Josh_polo »

That the lowest you can go?
User avatar
Polo96CL
Platinum Member
Posts: 1360
Joined: Wed Nov 14, 2007 4:13 pm
Location: Bromsgrove

Post by Polo96CL »

Once they settle i'm sure they will be fine, especially seeing as you have balloon tyres i'd be confident over speed bumps at that height. Looks much better though - black valver mmmm

Looks as though your camber is out though?
Rupie
Bronze Member
Posts: 168
Joined: Wed May 07, 2008 10:03 pm
Location: York

Post by Rupie »

nahhh, thats at the top of the threads lol, i set it half way down to start and then couldnt get the jack out from under the car it was that slammed lol...
i know them camber is out, shes off in for her MOT on fri, and they are sorting that and a wheel bearing :D
Josh_polo
Gold Member
Posts: 946
Joined: Mon Sep 10, 2007 10:05 pm
Location: Bexleyheath,kent
Contact:

Post by Josh_polo »

you could get it lower imo... it aint dubbin if it aint rubbin
BIG4244
Silver Member
Posts: 265
Joined: Sun May 27, 2007 12:18 pm
Location: Dartford

Post by BIG4244 »

josh YOU need to go lower
Josh_polo
Gold Member
Posts: 946
Joined: Mon Sep 10, 2007 10:05 pm
Location: Bexleyheath,kent
Contact:

Post by Josh_polo »

BIG4244 wrote:josh YOU need to go lower
:wink: :wink:
kyle1b1
Bronze Member
Posts: 246
Joined: Tue Aug 05, 2008 1:00 pm
Location: leeds

Post by kyle1b1 »

very nice.

i need to go low still in monster truck mode :cry:
Rupie
Bronze Member
Posts: 168
Joined: Wed May 07, 2008 10:03 pm
Location: York

Post by Rupie »

josh YOU need to go lower
lol, yeah come on josh, its at least 40mm lower than yours :lol:
dont worry, one they are bedded in ill wind them down again, you wanna see some of the speedbumps i have to drive over everyday :cry:
on some of them it rubs even at this height!
kipper
Platinum Member
Posts: 1240
Joined: Fri Jun 09, 2006 10:34 pm
Location: aldershot, england

Post by kipper »

u should go as low as me.i got 15's and 45 profile tyres and iv lowered it so much i can barely get my finger inbetween the tyre and arch and i scrape so much. i got loads of speed bumps and pot holes in my local area. i spend more time planning my journey as in looking at the road itself trying to avoid all the holes then i do looking at the traffic.

think i might raise it tho by about 10mm or a bit mroe and see how it goes then.
TheDubStrikesBack
New
Posts: 24
Joined: Sat May 10, 2008 7:29 pm
Location: Norwich

Post by TheDubStrikesBack »

i really want to lower my car has the monster truck look as well, but the whole issue of how it affects insurance worries me i called up my insurers to get a blunt if u aint 25 then no mods to your car, so im having to wait out the year insuranc ebefore finding a more leniant provider, any 1 else have same problem?
Josh_polo
Gold Member
Posts: 946
Joined: Mon Sep 10, 2007 10:05 pm
Location: Bexleyheath,kent
Contact:

Post by Josh_polo »

TheDubStrikesBack wrote:i really want to lower my car has the monster truck look as well, but the whole issue of how it affects insurance worries me i called up my insurers to get a blunt if u aint 25 then no mods to your car, so im having to wait out the year insuranc ebefore finding a more leniant provider, any 1 else have same problem?
Why tell them :? :lol:
clarkson
Bronze Member
Posts: 118
Joined: Thu Aug 21, 2008 9:50 am
Location: cleveleys, near blackpool

Post by clarkson »

looks good pal, i had mine dropped 40mm makes a difference, but i didnt tell me insurance **** that they will never know !!!!!!!!!!!!!
Post Reply