Questions?

POLOZ · Post by **POLOZ** » Tue Sep 30, 2008 8:32 pm

Hello Everybody,

have a query....I own a 2004 1.2e Polo.....
The questions is When i leave the door open and turn the ignition on....
I dont see the the red warning image saying my door is open!

But if I do the same with boot i can see a different warning image which i think means the boot door is open....

So I was wondering if this is normal for my spec model or is the fuse gone....because i find the fuse layout in polo v v confusing....

Thanks
KJ

black-a4 · Post by **black-a4** » Tue Sep 30, 2008 8:45 pm

Normal for your spec polo mate! I also have a 1.2E, had a 9n1.2e, and now a 9n31.2e!!

POLOZ · Post by **POLOZ** » Tue Sep 30, 2008 9:49 pm

black-a4 wrote:Normal for your spec polo mate! I also have a 1.2E, had a 9n1.2e, and now a 9n31.2e!!

is there a way i cud make it work...i.e if i put a fuse...pls advice

black-a4 · Post by **black-a4** » Wed Oct 01, 2008 6:46 pm

Not that I know of. But i may be wrong. I think you would need to change the instrument cluster, to get this function. And that would then need re-coded via VAG-com.

I am no expert though!

PS - good to see another NI member!!

POLOZ · Post by **POLOZ** » Wed Oct 01, 2008 7:41 pm

black-a4 wrote:Not that I know of. But i may be wrong. I think you would need to change the instrument cluster, to get this function. And that would then need re-coded via VAG-com.

I am no expert though!

PS - good to see another NI member!!

Oh dear

....flip i guess next time i will make sure i buy a higher spec car....

Thanks Mate....

JUV · Post by **JUV** » Thu Oct 02, 2008 12:08 pm

Is this also normal for an 02 plate, 1.2 S? Thanks..